Supergold V-Belts
The Supergold 1000 is a high-powered V-belt designed for the agricultural machinery industry
Properties
- A belt suitable for top performance applications
- It is extremely easy to operate it can replace virtually all types of Original Equipment belts.
- Exceptionally hard-wearing, it demonstrates perfect operating even when running at maximus capacity and at peak power.
- The belts service life is very long and this equipment even allows replacement times to be lengthened
- This belt can also be used for reverse bending purposes, not least because of its flexibility
A comparison between Supergold 1000 and New Orange
Additional comparative values can be obtained from the following table:
Belt type | Diagram | Properties | Power transmission | Impact resistance | Bending strength | Runtime | |
Super Gold 1000 | 1 (yellow) |
The best replacement belt for the agricultural machinery industry. It can replace virtually all OE belts. | ** | *** | ** | *** | |
New Orange | 2 (orange) |
This belt has been designed and developed for all kinds of applications in the agricultural machinery industry. It is highly durable and perfectly suited for use even at high temperatures or when submitted to high impact. | * | * | * | * |
Properties
- A belt perfectly suited for high impact loads
- Used for very heavy loads in the agricultural machinery industry and in the garden machinery industry.
Available belt pitches | LA | LB | LC | |||
Belt type | mantled | |||||
Doouble V-Belt available? | no | no | no | |||
Tolerance according to: | MBL | |||||
Belt material | Rubber | Chloroprene | ||||
Tensile member | Aramid | |||||
fabric | Cotton/Polyester | |||||
electrical conductivity | yes | |||||
Temperature-range | -30 ~ +90 | |||||
Wear resistance | high | |||||
Heat resistance | high | |||||
max. belt speed | (m/s) | 25 | ||||
Weight | (kg/m) | 0.12 | 0.20 | 0.35 | ||
available lengths | (inch) | 20-370 | 20-660 | 35-660 |
Properties
- Lends itself for use in the agricultural machinery industry and in the garden machinery industry.
- Toothed and raw-edged
- Retains its shape very well thanks to its exceptionally bendable rubber and given added strength by the aramid tensile cord, itself reinforced with glass fibre.
Available belt pitches | LA | LB | LC | |||
Belt type | raw edge | |||||
Doouble V-Belt available? | no | no | no | |||
Tolerance according to: | MBL | |||||
Belt material | upper fabric | Cotton | ||||
Rubber | Chloroprene | |||||
Tensile member | Aramid | |||||
bottom fabric | Nylon | |||||
electrical conductivity | yes | |||||
Temperature-range | -30 ~ +90 | |||||
Wear resistance | high | |||||
Heat resistance | good | |||||
max. belt speed | (m/s) | 25 | ||||
Weight | (kg/m) | 0.12 | 0.20 | 0.35 | ||
available lengths | (inch) | 18-95 | 20-96 | 24-96 |
Properties
- Suitable for use in the agricultural machinery industry and in the garden machinery industry.
- Toothed and raw-edged
- Ideal for heavy loads
- One of the strongest belts available for the agricultural machinery industry
- Particularly shock-proof as a result of its special aramid cord
- Retains its shape very well thanks to its exceptionally bendable rubber and given added strength by the aramid tensile cord, itself reinforced with glass fibre.
Available belt pitches | LB | LC | |||
Belt type | raw edge | ||||
Doouble V-Belt available? | Nein | Nein | |||
Tolerance according to: | MBL | ||||
Belt material | upper fabric | Cotton | |||
Rubber | Chloroprene | ||||
Tensile member | Aramid | ||||
bottom fabric | Nylon | ||||
electrical conductivity | yes | ||||
Temperature-range | -30 ~ +90 | ||||
Wear resistance | high | ||||
Heat resistance | high | ||||
max. belt speed | (m/s) | 25 | |||
Weight | (kg/m) | 0.20 | 0.35 | ||
available lengths | (inch) | 20-96 | 24-96 |
Supergold Order Reference
Supergold LA (inch) | |||||
Belt type | S-LA | ||||
axb (mm) | 12,5 x 8,2 | ||||
Belt nominal length |
20 | 42 | 64 | 86 | |
21 | 43 | 65 | 87 | ||
22 | 44 | 66 | 88 | ||
23 | 45 | 67 | 89 | ||
24 | 46 | 68 | 90 | ||
25 | 47 | 69 | 91 | ||
26 | 48 | 70 | 92 | ||
27 | 49 | 71 | 93 | ||
28 | 50 | 72 | 94 | ||
29 | 51 | 73 | 95 | ||
30 | 52 | 74 | 96 | ||
31 | 53 | 75 | 97 | ||
32 | 54 | 76 | 98 | ||
33 | 55 | 77 | 99 | ||
34 | 56 | 78 | 100 | ||
35 | 57 | 79 | |||
36 | 58 | 80 | |||
37 | 59 | 81 | |||
38 | 60 | 82 | |||
39 | 61 | 83 | |||
40 | 62 | 84 | |||
41 | 63 | 85 |
Supergold LB (inch) | |||||
Belt type | S-LB | ||||
axb (mm) | 16,5 x 9,8 | ||||
Belt nominal length |
25 | 47 | 69 | 91 | 132 |
26 | 48 | 70 | 92 | 135 | |
27 | 49 | 71 | 93 | 138 | |
28 | 50 | 72 | 94 | 140 | |
29 | 51 | 73 | 95 | 145 | |
30 | 52 | 74 | 96 | 150 | |
31 | 53 | 75 | 97 | 155 | |
32 | 54 | 76 | 98 | 160 | |
33 | 55 | 77 | 99 | 165 | |
34 | 56 | 78 | 100 | 170 | |
35 | 57 | 79 | 102 | 180 | |
36 | 58 | 80 | 105 | 190 | |
37 | 59 | 81 | 108 | 200 | |
38 | 60 | 82 | 110 | ||
39 | 61 | 83 | 112 | ||
40 | 62 | 84 | 115 | ||
41 | 63 | 85 | 118 | ||
42 | 64 | 86 | 120 | ||
43 | 65 | 87 | 122 | ||
44 | 66 | 88 | 125 | ||
45 | 67 | 89 | 128 | ||
46 | 68 | 90 | 130 |
Supergold LC (inch) | ||||
Belt type | S-LC | |||
axb (mm) | 21,7 x 11,4 | |||
Belt nominal length |
40 | 62 | 84 | 115 |
41 | 63 | 85 | 118 | |
42 | 64 | 86 | 120 | |
43 | 65 | 87 | 122 | |
44 | 66 | 88 | 125 | |
45 | 67 | 89 | 128 | |
46 | 68 | 90 | 130 | |
47 | 69 | 91 | 132 | |
48 | 70 | 92 | 135 | |
49 | 71 | 93 | 138 | |
50 | 72 | 94 | 140 | |
51 | 73 | 95 | 142 | |
52 | 74 | 96 | 145 | |
53 | 75 | 97 | 148 | |
54 | 76 | 98 | 150 | |
55 | 77 | 99 | 155 | |
56 | 78 | 100 | 160 | |
57 | 79 | 102 | 165 | |
58 | 80 | 105 | 170 | |
59 | 81 | 108 | 180 | |
60 | 82 | 110 | 190 | |
61 | 83 | 112 | 200 |
Alongside our wide standard range of this product, we also craft in our ateliers high-precision drawing parts and customised special pulley washers. With all our products we offer a comprehensive service ranging from the manufacturing of mechanical processing parts and gearing components right up to the mounting of finished systems and assembly units.
Pre-Tensioning The Belt Correctly
Firstly the belt always has to be tightened in line with the calculated pre-tensioning force and checked after a running-in period of about 5 minutes. The belt is then to be retightened according to the relevant value, should it have shifted or altered its position in any way. Finally after a further 8 hours of operating, the belt is to be once again inspected and, if necessary, tightened to comply with the required value that has already been calculated.
Causes of failure and corrective measures can be found in the following document:
Troubleshooting for power transmission products