SilentSync (Eagle NRG)
SilentSync (Eagle NRG)
the new reference in synchronous belt technology
The H.O.T. design of SilentSync (Eagle NRG) belts and sprockets reduces vibration and decreases operating noise by as much as 19 decibels versus other synchronous systems. This can lead to a quieter working environment with improved worker efficiency. Costs associated with monitoring, training and testing to meet OSHA regulations can be virtually eliminated with SilentSync (Eagle NRG) drives.
Benefits that add up
By employing circular arc geometry, SilentSync (Eagle NRG) belts and sprockets are able to provide better ratcheting resistance, precise movement, increased horsepower rating and improved stress distribution – all to better withstand the shearing action of high torque loads.
- Technical Details
- Color System
- Belt Sizes
- Standard Tooth Lock Washers
- Special Tooth Lock Washers
- Installation and Mounting
- Selection Diagram
- Performance Tables
- Calculation Factors
- Tension Test Force
- Noise Development
Dimensions
Color symbol | B Width mm |
T Pitch mm |
hs Thickness mm |
ht Tooth height mm |
---|---|---|---|---|
Y-Yellow | 16 | 8 | 5,33 | 3,05 |
W-White | 32 | 8 | 5,33 | 3,05 |
P-Pink | 64 | 8 | 5,33 | 3,05 |
B-Blue | 35 | 14 | 8,64 | 5,33 |
G-Green | 52,5 | 14 | 8,64 | 5,33 |
O-Orange | 70 | 14 | 8,64 | 5,33 |
R-Red | 105 | 14 | 8,64 | 5,33 |
The Advantages
Supremacy has to be measurable. Boasting an efficiency level of 98%, this belt even surpasses FOZ high-performance V-belts by a remarkable five per cent! And the following features also clearly demonstrate why the SilentSync (Eagle NRG) has become the new benchmark in the world of drive technology:
Advantages Over V-Belts
- No down times
- No stretching
- No tensioning device necessary
- Less bearing load thanks to lower belt pre-tensioning
- High efficiency level
Advantages Over Chains
- Significantly lower noise level
- Shorter down times and fewer maintenance costs
- No stretching
- No lubrication required
- Corrosion-resistant
- Wide range of velocity
- Longer service life
- Greater precision
One for all
Whether large or small drives - the SilentSync (Eagle NRG) is always ready to unfold its powerful performance under all kinds of operating conditions. With more than 1,000 possible cogwheel combinations, the system can adapt to every conceivable requirement profile. And the countless options of gear ratios expand the scope available for the layout of more compact drives.
Thus SilentSync (Eagle NRG) belts and cogwheels can be recommended for the following fields of application:
- Agricultural machinery
- Construction machines
- Mining equipment
- Conveyor systems
- Tooling machines
- Metalworking machinery
- Textile machines
- Industrial fans
- Woodworking machinery
- Paper industry machinery
- Pumps
- Foodstuff machinery
- Printing trade machinery
- Packing machinery
Temperature
SilentSync (Eagle NRG) belts can operate at ambient temperatures ranging from -40°C up to 95°C. Moreover, the belt's backing material can periodically shield against recurring surface temperatures of up to 135°C - a definite advantage when hot materials are being transported.
Oil Resistance
As a result of its sophisticated material properties, the SilentSync (Eagle NRG) is to a huge extent oil resistant. Consequently it lends itself perfectly to operations carried out under difficult drive conditions. Nevertheless, as is the case with all drive belts, contact with oil should be avoided as much as possible in order to be able to exploit the belt's performance characteristics optimally.
Resistance Against Chemicals
The HiBrex rubber compound found in the SilentSync (Eagle NRG) has proved to be resistant against the majority of chemical substances. More detailed information regarding resistance to individual materials can be obtained from the table below.
Synchronicity
SilentSync (Eagle NRG) timing belts are able to provide exact angular torque transmission at constant peripheral speed. Thanks to the meticulously formed shape of the teeth in a circular pattern and because of the extreme hardness of the material used, these belts are ideal for use in precision and positioning applications.
Belt Tensioning
Pre-tensioning has a significant effect on the service life of a belt, its degree of efficiency and on the running of its drive. If tensioning is too loose, the result could be oscillations on the slack strand and a jumping of the belt. Should the pre-tensioning be too tight, the lifespan of the belt will be shortened. Furthermore, vibrations and noises will occur on the tight strand. More details can be obtained about the best pre-tensioning methods under the section entitled "Installation and Tensioning".
Bearing Load
By reducing the bearing load, the bearing lifespan can be significantly lengthened. The following factors have a positive effect:
- Adherence to the calculated belt tension
- Selection of larger-diameter pulleys which require less belt tension
- Pulley washer should be positioned as close as possible to the bearing
HiBrex® Chemical resistance | |||
Chemical | Class | Chemical | Class |
Steam | B | Isooctane | A |
Acetic acid | B | Methylbenzene | C |
Hydrochloric acid | A | Trichlorethylene | C |
Phosphoric acid | A | Methyl alcohol | A |
Nitric acid | B | Methyl alcohol | A |
Sodium hydroxide | A | Ethyl ester | C |
Ammonia (28 %) | A | Ethyl acetate | U |
Sodium chloride (30 %) | A | Methyl ethyl ketone | U |
Sodium carbonate (30 %) | A | Fural | B |
Hydrogen peroxide (3 %) | B | Triethanolamine | A |
Sodium hypochlorite (5 %) | B | Carbon disulphide | C |
Type | Belt width [mm] |
Breaking strength [N/Strang] |
Module "E" [N/100% Dehnung] |
Permitted tensile load [N] |
Yellow | 16 | 9.373 | 366.011 | 1.668 |
White | 32 | 18.747 | 732.022 | 3.337 |
Pink | 64 | 37.494 | 1.464.044 | 6.674 |
Blue | 35 | 40.395 | 1.147.132 | 6.544 |
Green | 52,5 | 60.593 | 1.714.003 | 13.088 |
Orange | 70 | 80.790 | 2.294.265 | 13.088 |
Red | 105 | 121.185 | 3.441.397 | 19.632 |
Colour symbol | W Width mm |
P Pitch mm |
hs Belt thickness mm |
ht Tooth height mm |
---|---|---|---|---|
Y-Yellow | 16 | 8 | 5,33 | 3,05 |
W-White | 32 | 8 | 5,33 | 3,05 |
P-Pink | 64 | 8 | 5,33 | 3,05 |
B-Blue | 35 | 14 | 8,64 | 5,33 |
G-Green | 52,5 | 14 | 8,64 | 5,33 |
O-Orange | 70 | 14 | 8,64 | 5,33 |
R-Red | 105 | 14 | 8,64 | 5,33 |
Y Yellow |
Y Weight kg |
W White |
W Weight kg |
P Pink |
P Weight kg |
B Blue |
B Weight kg |
G Green |
G Weight kg |
O Orange |
O Weight kg |
R Red |
R Weight kg |
Y-640 | 0.045 | W-640 | 0.086 | P-720 | 0.200 | B-994 | 0.209 | G-994 | 0.309 | ||||
Y-720 | 0.050 | W-720 | 0.100 | P-800 | 0.218 | B-1120 | 0.232 | G-1120 | 0.350 | O-1120 | 0.468 | ||
Y-800 | 0.055 | W-800 | 0.109 | P-896 | 0.246 | B-1190 | 0.250 | G-1190 | 0.373 | O-1190 | 0.495 | ||
Y-896 | 0.064 | W-896 | 0.123 | P-1000 | 0.272 | B-1260 | 0.264 | G-1260 | 0.395 | O-1260 | 0.527 | R-1260 | 0.791 |
Y-1000 | 0.068 | W-1000 | 0.136 | P-1120 | 0.310 | B-1400 | 0.291 | G-1400 | 0.436 | O-1400 | 0.586 | R-1400 | 0.877 |
Y-1120 | 0.077 | W-1120 | 0.155 | P-1200 | 0.328 | B-1568 | 0.327 | G-1568 | 0.491 | O-1568 | 0.655 | R1568 | 1.982 |
Y-1200 | 0.082 | W-1200 | 0.164 | P-1280 | 0.354 | B-1750 | 0.364 | G-1750 | 0.550 | O-1750 | 0.732 | R-1750 | 1.095 |
Y-1280 | 0.086 | W-1280 | 0.177 | P-1440 | 0.390 | B-1960 | 0.409 | G-1960 | 0.614 | O-1960 | 0.818 | R-1960 | 1.227 |
Y-1440 | 0.100 | W-1440 | 0.195 | P-1600 | 0.436 | B-2100 | 0.436 | G-2100 | 0.659 | O-2100 | 0.877 | R-2100 | 1.314 |
Y-1600 | 0.109 | W-1600 | 0.218 | B-2240 | 0.468 | G-2240 | 0.700 | O-2240 | 0.936 | R-2240 | 1.405 | ||
Y-1792 | 0.123 | W-1792 | 0.245 | B-2380 | 0.495 | G-2380 | 0.745 | O-2380 | 0.995 | R-2380 | 1.491 | ||
Y-2000 | 0.136 | W-2000 | 0.273 | B-2520 | 0.527 | G-2520 | 0.791 | O-2520 | 1.050 | R-2520 | 1.577 | ||
Y-2240 | 0.155 | W-2240 | 0.309 | B-2660 | 0.555 | G-2660 | 0.832 | O-2660 | 1.109 | R-2660 | 1.668 | ||
Y-2400 | 0.164 | W-2400 | 0.327 | B-2800 | 0.586 | G-2800 | 0.877 | O-2800 | 1.168 | R-2800 | 1.755 | ||
B-3136 | 0.796 | G-3136 | 1.194 | O-3136 | 1.593 | R-3136 | 2.398 | ||||||
B-3304 | 0.838 | G-3304 | 1.257 | O-3304 | 1.676 | R-3304 | 2.524 | ||||||
B-3500 | 0.887 | G-3500 | 1.331 | O-3500 | 1.774 | R-3500 | 2.672 | ||||||
B-3920 | 0.992 | G-3920 | 1.488 | O-3920 | 1.984 | R-3920 | 2.988 |
Eagle/SilentSnyc Typ Y · Tooth pitch 8 mm · Toothed width LA = 17 mm | ||||||||||||
Cogwheel type |
Teeth no. |
Max. borehole |
Drawing | da | dw | E | D | LA | K | LB | d | Material |
Y-18S-MPB | 18 | 26 | 1 | 44.47 | 45.84 | 38.7 | 17 | 10 | 27 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-20S-MPB | 20 | 27 | 1 | 49.56 | 50.93 | 40.7 | 17 | 12 | 29 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-22S-MPB | 22 | 31 | 1 | 54.65 | 56.02 | 45.9 | 17 | 12 | 29 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-24S-MPB | 24 | 34 | 1 | 59.75 | 61.12 | 51 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-25S-MPB | 25 | 36 | 1 | 62.29 | 63.66 | 53.5 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-26S-MPB | 26 | 39 | 1 | 64.84 | 66.21 | 57.8 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-28S-MPB | 28 | 41 | 1 | 69.93 | 71.30 | 61 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-30S-MPB | 30 | 45 | 1 | 75.03 | 76.40 | 67 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-32S-MPB | 32 | 48 | 1 | 80.12 | 81.49 | 72 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-34S-MPB | 34 | 51 | 1 | 85.21 | 86.58 | 77 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-36S-MPB | 36 | 55 | 1 | 90.30 | 91.68 | 82 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-38S-MPB | 38 | 58 | 1 | 95.40 | 96.77 | 87 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-40S-MPB | 40 | 62 | 1 | 100.49 | 101.86 | 92 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-44S-MPB | 44 | 68 | 1 | 110.68 | 112.05 | 102 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-45S-MPB | 45 | 70 | 1 | 113.22 | 114.59 | 105 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-48S-MPB | 48 | 75 | 1 | 120.86 | 122.23 | 112 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-50S-MPB | 50 | 79 | 1 | 125.96 | 127.33 | 118 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-52S-MPB | 52 | 82 | 1 | 131.05 | 132.42 | 123 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-56S-MPB | 56 | 89 | 1 | 141.24 | 142.61 | 133 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-60S-MPB | 60 | 96 | 1 | 151.42 | 152.79 | 143 | 17 | 16 | 33 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
Y-63S-MPB | 63 | 73 | 2 | 159.06 | 160.43 | 135 | 110 | 17 | 16 | 33 | 12.7 | GS400 |
Y-64S-MPB | 64 | 74 | 2 | 161.61 | 152.98 | 138 | 110 | 17 | 16 | 33 | 12.7 | GS400 |
Y-68S-MPB | 68 | 74 | 2 | 171.79 | 173.17 | 148 | 110 | 17 | 16 | 33 | 12.7 | GS400 |
Y-72S-MPB | 72 | 74 | 2 | 181.98 | 183.35 | 158 | 110 | 17 | 16 | 33 | 12.7 | GS400 |
Y-75S-MPB | 75 | 73 | 2 | 189.62 | 190.99 | 166 | 110 | 17 | 16 | 33 | 12.7 | GS400 |
Y-76S-MPB | 76 | 74 | 2 | 192.17 | 193.54 | 168 | 110 | 17 | 16 | 33 | 12.7 | GS400 |
Y-80S-MPB | 80 | 73 | 2 | 202.35 | 203.72 | 178 | 110 | 17 | 16 | 33 | 12.7 | GS400 |
Y-90S-MPB | 90 | 73 | 2 | 227.82 | 229.19 | 204 | 110 | 17 | 16 | 33 | 25.4 | GS400 |
Y-112S-MPB | 112 | 73 | 2 | 283.84 | 285.21 | 260 | 110 | 17 | 16 | 33 | 25.4 | GS400 |
Y-140S-MPB | 140 | 73 | 2 | 355.15 | 356.52 | 331 | 110 | 17 | 16 | 33 | 25.4 | GS400 |
Y-180S-MPB | 180 | 100 | 3 | 457.01 | 458.38 | 433 | 150 | 17 | 16 | 33 | 25.4 | GG |
Y-224S-MPB | 224 | 100 | 3 | 569.06 | 570.43 | 545 | 150 | 17 | 16 | 33 | 25.4 | GG |
GS400 = Ductile iron | ||||||||||||
GG = Grey iron | ||||||||||||
All dimensions in mm |
Eagle/SilentSnyc Typ W · Tooth pitch 8 mm · Toothed width LA = 33 mm | ||||||||||||
Cogwheel type |
Teeth no. |
Max. borehole |
Drawing | da | dw | E | D | LA | K | LB | d | Material |
W-18S-MPB | 18 | 26 | 1 | 44.47 | 45.84 | 38.7 | 33 | 10 | 43 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-20S-MPB | 20 | 27 | 1 | 49.56 | 50.93 | 40.7 | 33 | 12 | 45 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-22S-MPB | 22 | 31 | 1 | 54.65 | 56.02 | 45.9 | 33 | 12 | 45 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-24S-MPB | 24 | 34 | 1 | 59.75 | 61.12 | 51 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-25S-MPB | 25 | 36 | 1 | 62.29 | 63.66 | 53.5 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-26S-MPB | 26 | 39 | 1 | 64.84 | 66.21 | 57.8 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-28S-MPB | 28 | 41 | 1 | 69.93 | 71.30 | 62 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-30S-MPB | 30 | 45 | 1 | 75.03 | 76.40 | 67 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-32S-MPB | 32 | 48 | 1 | 80.12 | 81.49 | 72 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-34S-MPB | 34 | 51 | 1 | 85.21 | 86.58 | 77 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-36S-MPB | 36 | 55 | 1 | 90.30 | 91.68 | 82 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-38S-MPB | 38 | 58 | 1 | 95.40 | 96.77 | 87 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-40S-MPB | 40 | 62 | 1 | 100.49 | 101.86 | 92 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-44S-MPB | 44 | 68 | 1 | 110.68 | 112.05 | 102 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-45S-MPB | 45 | 70 | 1 | 113.22 | 114.59 | 105 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-48S-MPB | 48 | 75 | 1 | 120.86 | 122.23 | 113 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-50S-MPB | 50 | 79 | 1 | 125.96 | 127.33 | 118 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-52S-MPB | 52 | 82 | 1 | 131.05 | 132.42 | 123 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-56S-MPB | 56 | 89 | 1 | 141.24 | 142.61 | 133 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-60S-MPB | 60 | 96 | 1 | 151.42 | 152.79 | 143 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-63S-MPB | 63 | 101 | 1 | 159.06 | 160.43 | 151 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-64S-MPB | 64 | 102 | 1 | 161.61 | 152.98 | 153 | 33 | 16 | 49 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
W-68S-MPB | 68 | 80 | 2 | 171.79 | 173.17 | 148 | 120 | 33 | 16 | 49 | 25.4 | GS400 |
W-72S-MPB | 72 | 80 | 2 | 181.98 | 183.35 | 158 | 120 | 33 | 16 | 49 | 25.4 | GS400 |
W-75S-MPB | 75 | 80 | 2 | 189.62 | 190.99 | 166 | 120 | 33 | 16 | 49 | 25.4 | GS400 |
W-76S-MPB | 76 | 80 | 2 | 192.17 | 193.54 | 168 | 120 | 33 | 16 | 49 | 25.4 | GS400 |
W-80S-MPB | 80 | 80 | 2 | 202.35 | 203.72 | 178 | 120 | 33 | 16 | 49 | 25.4 | GS400 |
W-90S-MPB | 90 | 80 | 2 | 227.82 | 229.19 | 204 | 120 | 33 | 16 | 49 | 25.4 | GS400 |
W-112S-MPB | 112 | 80 | 2 | 283.84 | 285.21 | 260 | 120 | 33 | 16 | 49 | 25.4 | GS400 |
W-140S-MPB | 140 | 100 | 2 | 355.15 | 356.52 | 331 | 150 | 33 | 16 | 49 | 25.4 | GS400 |
W-180S-MPB | 180 | 100 | 3 | 457.01 | 458.38 | 433 | 150 | 33 | 16 | 49 | 25.4 | GG |
W-224S-MPB | 224 | 100 | 3 | 569.06 | 570.43 | 545 | 150 | 33 | 16 | 49 | 25.4 | GG |
GS400 = Ductile iron | ||||||||||||
GG = Grey iron | ||||||||||||
All dimensions in mm |
Eagle/SilentSnyc Typ P · Tooth pitch 8 mm · Toothed width LA = 65 mm | ||||||||||||
Cogwheel type |
Teeth no. |
Max. borehole |
Drawing | da | dw | E | D | LA | K | LB | d | Material |
P-18S-MPB | 18 | 26 | 1 | 44.47 | 45.84 | 38.7 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-20S-MPB | 20 | 27 | 1 | 49.56 | 50.93 | 40.7 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-22S-MPB | 22 | 31 | 1 | 54.65 | 56.02 | 45.9 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-24S-MPB | 24 | 34 | 1 | 59.75 | 61.12 | 51 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-25S-MPB | 25 | 36 | 1 | 62.29 | 63.66 | 53.5 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-26S-MPB | 26 | 39 | 1 | 64.84 | 66.21 | 57.8 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-28S-MPB | 28 | 41 | 1 | 69.93 | 71.30 | 62 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-30S-MPB | 30 | 45 | 1 | 75.03 | 76.40 | 67 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-32S-MPB | 32 | 48 | 1 | 80.12 | 81.49 | 72 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-34S-MPB | 34 | 51 | 1 | 85.21 | 86.58 | 77 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-36S-MPB | 36 | 55 | 1 | 90.30 | 91.68 | 82 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-38S-MPB | 38 | 58 | 1 | 95.40 | 96.77 | 87 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-40S-MPB | 40 | 62 | 1 | 100.49 | 101.86 | 92 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-44S-MPB | 44 | 68 | 1 | 110.68 | 112.05 | 102 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-45S-MPB | 45 | 70 | 1 | 113.22 | 114.59 | 105 | 65 | 20 | 85 | 12.7 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-48S-MPB | 48 | 75 | 1 | 120.86 | 122.23 | 113 | 65 | 20 | 85 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-50S-MPB | 50 | 79 | 1 | 125.96 | 127.33 | 118 | 65 | 20 | 85 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-52S-MPB | 52 | 82 | 1 | 131.05 | 132.42 | 123 | 65 | 20 | 85 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-56S-MPB | 56 | 89 | 1 | 141.24 | 142.61 | 133 | 65 | 20 | 85 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-60S-MPB | 60 | 96 | 1 | 151.42 | 152.79 | 143 | 65 | 20 | 85 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-63S-MPB | 63 | 101 | 1 | 159.06 | 160.43 | 151 | 65 | 20 | 85 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-64S-MPB | 64 | 102 | 1 | 161.61 | 152.98 | 154 | 65 | 20 | 85 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
P-68S-MPB | 68 | 108 | 2 | 171.79 | 173.17 | 148 | 120 | 65 | 20 | 85 | 25.4 | GS400 |
P-72S-MPB | 72 | 115 | 2 | 181.98 | 183.35 | 158 | 120 | 65 | 20 | 85 | 25.4 | GS400 |
P-75S-MPB | 75 | 120 | 2 | 189.62 | 190.99 | 166 | 120 | 65 | 20 | 85 | 25.4 | GS400 |
P-76S-MPB | 76 | 120 | 2 | 192.17 | 193.54 | 168 | 120 | 65 | 20 | 85 | 25.4 | GS400 |
P-80S-MPB | 80 | 125 | 2 | 202.35 | 203.72 | 178 | 120 | 65 | 20 | 85 | 25.4 | GS400 |
P-90S-MPB | 90 | 80 | 2 | 227.82 | 229.19 | 204 | 120 | 65 | 20 | 85 | 25.4 | GS400 |
P-112S-MPB | 112 | 80 | 2 | 283.84 | 285.21 | 260 | 120 | 65 | 20 | 85 | 25.4 | GS400 |
P-140S-MPB | 140 | 100 | 2 | 355.15 | 356.52 | 331 | 150 | 65 | 20 | 85 | 25.4 | GS400 |
P-180S-MPB | 180 | 100 | 3 | 457.01 | 458.38 | 433 | 150 | 65 | 20 | 85 | 25.4 | GG |
P-224S-MPB | 224 | 100 | 3 | 569.06 | 570.43 | 545 | 150 | 65 | 20 | 85 | 25.4 | GG |
GS400 = Ductile iron | ||||||||||||
GG = Grey iron | ||||||||||||
All dimensions in mm |
Eagle/SilentSnyc Typ B · Tooth pitch 14 mm · Toothed width LA = 37 mm | ||||||||||||
Cogwheel type |
Teeth no. |
Max. borehole |
Zeich- nung |
da | dw | E | D | LA | K | LB | d | Material |
B-28S-MPB | 28 | 70 | 1 | 121.99 | 124.78 | 105 | 37 | 16 | 53 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
B-30S-MPB | 30 | 76 | 1 | 130.90 | 133.69 | 114 | 37 | 16 | 53 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
B-32S-MPB | 32 | 82 | 1 | 139.81 | 142.61 | 123 | 37 | 16 | 53 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
B-34S-MPB | 34 | 88 | 1 | 148.73 | 151.52 | 132 | 37 | 16 | 53 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
B-36S-MPB | 36 | 94 | 1 | 157.64 | 160.43 | 141 | 37 | 16 | 53 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
B-38S-MPB | 38 | 100 | 1 | 166.55 | 169.35 | 150 | 37 | 16 | 53 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
B-40S-MPB | 40 | 106 | 1 | 175.46 | 178.26 | 159 | 37 | 16 | 53 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
B-43S-MPB | 43 | 115 | 1 | 188.83 | 191.63 | 172 | 37 | 16 | 53 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
B-45S-MPB | 45 | 121 | 1 | 197.75 | 200.54 | 181 | 37 | 16 | 53 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
B-48S-MPB | 48 | 130 | 1 | 211.12 | 213.91 | 195 | 37 | 16 | 53 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
B-50S-MPB | 50 | 100 | 2 | 220.03 | 222.82 | 180 | 150 | 37 | 16 | 53 | 25.4 | GS400 |
B-56S-MPB | 56 | 100 | 2 | 246.77 | 249.56 | 207 | 150 | 37 | 16 | 53 | 25.4 | GS400 |
B-60S-MPB | 60 | 100 | 2 | 264.59 | 267.39 | 225 | 150 | 37 | 16 | 53 | 25.4 | GS400 |
B-63S-MPB | 63 | 100 | 2 | 277.96 | 280.76 | 238 | 150 | 37 | 16 | 53 | 25.4 | GS400 |
B-71S-MPB | 71 | 100 | 2 | 313.62 | 316.41 | 274 | 150 | 37 | 16 | 53 | 25.4 | GS400 |
B-75S-MPB | 75 | 100 | 2 | 331.44 | 334.24 | 291 | 150 | 37 | 16 | 53 | 25.4 | GS400 |
B-80S-MPB | 80 | 100 | 2 | 353.72 | 356.52 | 314 | 150 | 37 | 16 | 53 | 25.4 | GS400 |
B-90S-MPB | 90 | 100 | 2 | 398.29 | 401.08 | 358 | 150 | 37 | 16 | 53 | 25.4 | GG |
B-112S-MPB | 112 | 100 | 3 | 496.33 | 499.12 | 456 | 150 | 37 | 16 | 53 | 25.4 | GG |
B-140S-MPB | 140 | 100 | 3 | 621.11 | 623.91 | 581 | 150 | 37 | 16 | 53 | 25.4 | GG |
B-168S-MPB | 168 | 100 | 3 | 745.89 | 748.69 | 706 | 150 | 37 | 16 | 53 | 25.4 | GG |
GS400 = Ductile iron | ||||||||||||
GG = Grey iron | ||||||||||||
All dimensions in mm |
Eagle/SilentSnyc Typ G · Tooth pitch 14 mm · Toothed width LA = 54,5 mm | ||||||||||||
Cogwheel type |
Teeth no. |
Max. borehole |
Drawing | da | dw | E | D | LA | K | LB | d | Material |
G-28S-MPB | 28 | 73 | 1 | 121.99 | 124.78 | 109 | 54.5 | 20 | 74.5 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
G-30S-MPB | 30 | 78 | 1 | 130.90 | 133.69 | 117.5 | 54.5 | 20 | 74.4 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
G-32S-MPB | 32 | 84 | 1 | 139.81 | 142.61 | 126.5 | 54.5 | 20 | 74.5 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
G-34S-MPB | 34 | 90 | 1 | 148.73 | 151.52 | 135.5 | 54.5 | 20 | 74.5 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
G-36S-MPB | 36 | 94 | 1 | 157.64 | 160.43 | 141 | 54.5 | 16 | 70.5 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
G-38S-MPB | 38 | 100 | 1 | 166.55 | 169.35 | 150 | 54.5 | 16 | 70.5 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
G-40S-MPB | 40 | 106 | 1 | 175.46 | 178.26 | 159 | 54.5 | 16 | 70.5 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
G-43S-MPB | 43 | 115 | 1 | 188.83 | 191.63 | 172 | 54.5 | 16 | 70.5 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
G-45S-MPB | 45 | 121 | 1 | 197.75 | 200.54 | 181 | 54.5 | 16 | 70.5 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
G-48S-MPB | 48 | 130 | 1 | 211.12 | 213.91 | 195 | 54.5 | 16 | 70.5 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
G-50S-MPB | 50 | 100 | 2 | 220.03 | 222.82 | 180 | 150 | 54.5 | 16 | 70.5 | 25.4 | GS400 |
G-56S-MPB | 56 | 100 | 2 | 246.77 | 249.56 | 207 | 150 | 54.5 | 16 | 70.5 | 25.4 | GS400 |
G-60S-MPB | 60 | 100 | 2 | 264.59 | 267.39 | 225 | 150 | 54.5 | 16 | 70.5 | 25.4 | GS400 |
G-63S-MPB | 63 | 100 | 2 | 277.96 | 280.76 | 238 | 150 | 54.5 | 16 | 70.5 | 25.4 | GS400 |
G-71S-MPB | 71 | 100 | 2 | 313.62 | 316.41 | 274 | 150 | 54.5 | 16 | 70.5 | 25.4 | GS400 |
G-75S-MPB | 75 | 100 | 2 | 331.44 | 334.24 | 291 | 150 | 54.5 | 16 | 70.5 | 25.4 | GS400 |
G-80S-MPB | 80 | 100 | 2 | 353.72 | 356.52 | 314 | 150 | 54.5 | 16 | 70.5 | 25.4 | GS400 |
G-90S-MPB | 90 | 120 | 2 | 398.29 | 401.08 | 358 | 180 | 54.5 | 16 | 70.5 | 25.4 | GG |
G-112S-MPB | 112 | 120 | 3 | 496.33 | 499.12 | 456 | 180 | 54.5 | 16 | 70.5 | 25.4 | GG |
G-140S-MPB | 140 | 133 | 3 | 621.11 | 623.91 | 581 | 200 | 54.5 | 16 | 70.5 | 25.4 | GG |
G-168S-MPB | 168 | 133 | 3 | 745.89 | 748.69 | 706 | 200 | 54.5 | 16 | 70.5 | 25.4 | GG |
GS400 = Sphäroguss | ||||||||||||
GG = Grey iron | ||||||||||||
All dimensions in mm |
Eagle/SilentSnyc Typ O · Tooth pitch 14 mm · Toothed width LA = 72 mm | ||||||||||||
Cogwheel type |
Teeth no. |
Max. borehole |
Drawing | da | dw | E | D | LA | K | LB | d | Material |
O-28S-MPB | 28 | 73 | 1 | 121.99 | 124.78 | 109 | 72 | 20 | 92 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
O-30S-MPB | 30 | 78 | 1 | 130.90 | 133.69 | 117.5 | 72 | 20 | 92 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
O-32S-MPB | 32 | 84 | 1 | 139.81 | 142.61 | 126.5 | 72 | 26 | 98 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
O-34S-MPB | 34 | 90 | 1 | 148.73 | 151.52 | 135.5 | 72 | 26 | 98 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
O-36S-MPB | 36 | 95 | 1 | 157.64 | 160.43 | 144 | 72 | 26 | 98 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
O-38S-MPB | 38 | 101 | 1 | 166.55 | 169.35 | 153 | 72 | 26 | 98 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
O-40S-MPB | 40 | 107 | 1 | 175.46 | 178.26 | 162 | 72 | 26 | 98 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
O-43S-MPB | 43 | 116 | 1 | 188.83 | 191.63 | 174 | 72 | 26 | 98 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
O-45S-MPB | 45 | 122 | 1 | 197.75 | 200.54 | 183 | 72 | 16 | 88 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
O-48S-MPB | 48 | 131 | 1 | 211.12 | 213.91 | 197 | 72 | 16 | 88 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
O-50S-MPB | 50 | 137 | 1 | 220.03 | 222.82 | 205 | 72 | 16 | 88 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
O-56S-MPB | 56 | 153 | 1 | 246.77 | 249.56 | 230 | 72 | 16 | 88 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
O-60S-MPB | 60 | 100 | 2 | 264.59 | 267.39 | 225 | 150 | 72 | 16 | 88 | 25.4 | GS400 |
O-63S-MPB | 63 | 100 | 2 | 277.96 | 280.76 | 238 | 150 | 72 | 16 | 88 | 25.4 | GS400 |
O-71S-MPB | 71 | 100 | 2 | 313.62 | 316.41 | 274 | 150 | 72 | 16 | 88 | 25.4 | GS400 |
O-75S-MPB | 75 | 120 | 2 | 331.44 | 334.24 | 291 | 180 | 72 | 16 | 88 | 25.4 | GS400 |
O-80S-MPB | 80 | 120 | 2 | 353.72 | 356.52 | 314 | 180 | 72 | 16 | 88 | 25.4 | GS400 |
O-90S-MPB | 90 | 133 | 2 | 398.29 | 401.08 | 358 | 200 | 72 | 16 | 88 | 25.4 | GG |
O-112S-MPB | 112 | 133 | 3 | 496.33 | 499.12 | 456 | 200 | 72 | 16 | 88 | 25.4 | GG |
O-140S-MPB | 140 | 147 | 3 | 621.11 | 623.91 | 581 | 220 | 72 | 16 | 88 | 25.4 | GG |
O-168S-MPB | 168 | 147 | 3 | 745.89 | 748.69 | 706 | 220 | 72 | 16 | 88 | 25.4 | GG |
GS400 = Ductile iron | ||||||||||||
GG = Grey iron | ||||||||||||
All dimensions in mm |
Eagle/SilentSnyc Typ R · Tooth pitch 14 mm · Toothed width LA = 107 mm | ||||||||||||
Cogwheel type |
Teeth no. |
Max. borehole |
Drawing | da | dw | E | D | LA | K | LB | d | Material |
R-28S-MPB | 28 | 73 | 1 | 121.99 | 124.78 | 109 | 107 | 26 | 133 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
R-30S-MPB | 30 | 78 | 1 | 130.90 | 133.69 | 117.5 | 107 | 26 | 133 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
R-32S-MPB | 32 | 84 | 1 | 139.81 | 142.61 | 126.5 | 107 | 26 | 133 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
R-34S-MPB | 34 | 90 | 1 | 148.73 | 151.52 | 135.5 | 107 | 26 | 133 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
R-36S-MPB | 36 | 96 | 1 | 157.64 | 160.43 | 144 | 107 | 26 | 133 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
R-38S-MPB | 38 | 102 | 1 | 166.55 | 169.35 | 153 | 107 | 26 | 133 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
R-40S-MPB | 40 | 108 | 1 | 175.46 | 178.26 | 162 | 107 | 26 | 133 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
R-43S-MPB | 43 | 117 | 1 | 188.83 | 191.63 | 175 | 107 | 26 | 133 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
R-45S-MPB | 45 | 122 | 1 | 197.75 | 200.54 | 183 | 107 | 16 | 123 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
R-48S-MPB | 48 | 131 | 1 | 211.12 | 213.91 | 197 | 107 | 16 | 123 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
R-50S-MPB | 50 | 137 | 1 | 220.03 | 222.82 | 205 | 107 | 16 | 123 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
R-56S-MPB | 56 | 153 | 1 | 246.77 | 249.56 | 230 | 107 | 16 | 123 | 25.4 | Warning: Undefined array key "steel" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 |
|
R-60S-MPB | 60 | 120 | 2 | 264.59 | 267.39 | 225 | 180 | 107 | 16 | 123 | 25.4 | GS400 |
R-63S-MPB | 63 | 120 | 2 | 277.96 | 280.76 | 238 | 180 | 107 | 16 | 123 | 25.4 | GS400 |
R-71S-MPB | 71 | 133 | 2 | 313.62 | 316.41 | 274 | 200 | 107 | 16 | 123 | 25.4 | GS400 |
R-75S-MPB | 75 | 133 | 2 | 331.44 | 334.24 | 291 | 200 | 107 | 16 | 123 | 25.4 | GS400 |
R-80S-MPB | 80 | 133 | 2 | 353.72 | 356.52 | 314 | 200 | 107 | 16 | 123 | 25.4 | GS400 |
R-90S-MPB | 90 | 147 | 2 | 398.29 | 401.08 | 358 | 220 | 107 | 16 | 123 | 25.4 | GG |
R-112S-MPB | 112 | 147 | 3 | 496.33 | 499.12 | 456 | 220 | 107 | 16 | 123 | 25.4 | GG |
R-140S-MPB | 140 | 160 | 3 | 621.11 | 623.91 | 581 | 240 | 107 | 16 | 123 | 25.4 | GG |
R-168S-MPB | 168 | 160 | 3 | 745.89 | 748.69 | 706 | 240 | 107 | 16 | 123 | 25.4 | GG |
GS400 = Ductile iron | ||||||||||||
GG = Grey iron | ||||||||||||
All dimensions in mm |
Eagle/Silent Sync Sprocket Tolerances | ||||||
Outer diameter | Tolerance outer diameter | Axial tolerance | Radial tolerance | Permitted tooth pitch deviation | ||
mm from | mm to | mm | mm | mm | mm | |
0,00 | 101,60 | 0/+0,13 | 0,13 | 0,12 | 0,10 | |
101,60 | 177,80 | 0/+0,13 | 0,13 | 0,15 | 0,10 | |
177,80 | 304,80 | 0/+0,15 | 0,15 | 0,20 | 0,10 | |
304,80 | 508,00 | 0/+0,18 | 0,20 | 0,35 | 0,10 | |
508,00 | 750,00 | 0/+0,20 | 0,30 | 0,43 | 0,10 |
Warning: Array to string conversion in /var/www/vhosts/krebs-kessel.de/httpdocs/grafiken/produkte/5/tabs/87/inc/jw-goodyear_daseagle-pd-programm_zahnscheibendurchmesser.php on line 130
Y, W, P = Tooth pitch 8 mm | ||||||||
Number of Teeth | Effective-Ø (mm) |
Outer-Ø (mm) |
Number of Teeth | Effective-Ø (mm) |
Outer-Ø (mm) |
Number of Teeth | Effective-Ø (mm) |
Outer-Ø (mm) |
18 | 45,84 | 44,46 | 61 | 155,34 | 153,96 | 104 | 264,83 | 263,46 |
19 | 48,38 | 47,01 | 62 | 157,88 | 156,51 | 105 | 267,38 | 266,01 |
20 | 50,93 | 49,56 | 63 | 160,43 | 159,06 | 106 | 269,93 | 268,55 |
21 | 53,48 | 52,10 | 64 | 162,97 | 161,6 | 107 | 272,47 | 271,1 |
22 | 56,002 | 54,65 | 65 | 165,52 | 164,15 | 108 | 275,02 | 273,65 |
23 | 58,57 | 57,2 | 66 | 168,07 | 166,7 | 109 | 277,57 | 276,19 |
24 | 61,12 | 59,74 | 67 | 170,61 | 169,24 | 110 | 280,11 | 278,74 |
25 | 63,66 | 62,29 | 68 | 173,16 | 171,79 | 111 | 282,66 | 281,29 |
26 | 66,21 | 64,84 | 69 | 175,71 | 174,34 | 112 | 285,21 | 283,83 |
27 | 68,75 | 67,38 | 70 | 178,25 | 176,88 | 113 | 287,75 | 286,38 |
28 | 71,30 | 69,33 | 71 | 180,8 | 179,43 | 114 | 290,3 | 288,93 |
29 | 73,85 | 72,48 | 72 | 183,35 | 181,97 | 115 | 292,85 | 291,47 |
30 | 76,39 | 75,02 | 73 | 185,89 | 184,52 | 116 | 295,39 | 294,02 |
31 | 78,94 | 77,57 | 74 | 188,44 | 187,07 | 117 | 297,94 | 296,57 |
32 | 81,49 | 80,12 | 75 | 190,99 | 189,61 | 118 | 300,48 | 299,11 |
33 | 84,03 | 82,66 | 76 | 193,53 | 192,16 | 119 | 303,03 | 301,66 |
34 | 86,58 | 85,21 | 77 | 196,08 | 194,71 | 120 | 305,58 | 304,21 |
35 | 89,13 | 87,75 | 78 | 198,63 | 197,25 | 121 | 308,12 | 306,75 |
36 | 91,67 | 90,3 | 79 | 201,17 | 199,8 | 122 | 310,67 | 309,3 |
37 | 94,22 | 92,85 | 80 | 203,72 | 202,35 | 123 | 313,22 | 311,84 |
38 | 96,77 | 95,39 | 81 | 206,26 | 204,89 | 124 | 315,76 | 314,39 |
39 | 99,31 | 97,94 | 82 | 208,81 | 207,44 | 125 | 318,31 | 316,94 |
40 | 101,86 | 100,49 | 83 | 211,36 | 209,99 | 126 | 320,86 | 319,48 |
41 | 104,41 | 103,03 | 84 | 213,9 | 212,53 | 127 | 323,4 | 322,03 |
42 | 106,95 | 105,58 | 85 | 216,45 | 215,08 | 128 | 325,95 | 324,58 |
43 | 109,5 | 108,13 | 86 | 219 | 217,63 | 129 | 328,5 | 327,12 |
44 | 112,05 | 110,67 | 87 | 221,54 | 220,17 | 130 | 331,04 | 329,67 |
45 | 114,59 | 113,22 | 88 | 224,09 | 222,72 | 131 | 333,59 | 332,22 |
46 | 117,14 | 115,77 | 89 | 226,64 | 225,26 | 132 | 336,14 | 334,76 |
47 | 119,68 | 118,31 | 90 | 229,18 | 227,81 | 133 | 338,68 | 337,31 |
48 | 112,23 | 120,86 | 91 | 231,73 | 230,36 | 134 | 341,23 | 339,86 |
49 | 124,78 | 123,41 | 92 | 234,28 | 232,9 | 135 | 343,77 | 342,4 |
50 | 127,32 | 125,95 | 93 | 236,82 | 235,45 | 136 | 346,32 | 344,95 |
51 | 129,87 | 128,5 | 94 | 239,37 | 238 | 137 | 348,87 | 347,5 |
52 | 132,42 | 132,04 | 95 | 241,92 | 240,54 | 138 | 351,41 | 350,04 |
53 | 134,96 | 133,59 | 96 | 224,46 | 243,09 | 139 | 353,96 | 352,59 |
54 | 137,51 | 136,14 | 97 | 247,01 | 245,64 | 140 | 356,51 | 355,14 |
55 | 140,06 | 138,68 | 98 | 249,56 | 248,18 | 141 | 359,05 | 357,68 |
56 | 142,6 | 141,23 | 99 | 252,1 | 250,73 | 142 | 361,6 | 360,23 |
57 | 145,15 | 143,78 | 100 | 254,65 | 253,28 | 143 | 364,15 | 362,77 |
58 | 147,7 | 146,32 | 101 | 257,19 | 255,82 | 144 | 366,69 | 365,32 |
59 | 150,24 | 148,87 | 102 | 259,74 | 258,37 | |||
60 | 152,79 | 151,42 | 103 | 262,29 | 260,92 |
B, G, O, R = Tooth pitch 14 mm | |||||||||
Number of Teeth | Effective-Ø (mm) |
Outer-Ø (mm) |
Number of Teeth | Effective-Ø (mm) |
Outer-Ø (mm) |
Number of Teeth | Effective-Ø (mm) |
Outer-Ø (mm) |
|
28 | 124,78 | 121,98 | 70 | 311,94 | 309,15 | 112 | 499,11 | 496,32 | |
29 | 129,23 | 126,44 | 71 | 316,4 | 313,61 | 113 | 503,57 | 500,77 | |
30 | 133,69 | 130,9 | 72 | 320,86 | 318,06 | 114 | 508,02 | 505,23 | |
31 | 138,15 | 135,35 | 73 | 325,31 | 322,52 | 115 | 512,48 | 509,68 | |
32 | 142,6 | 139,81 | 74 | 329,77 | 326,98 | 116 | 516,94 | 514,14 | |
33 | 147,06 | 144,27 | 75 | 334,23 | 331,43 | 117 | 521,39 | 518,6 | |
34 | 151,52 | 148,72 | 76 | 338,68 | 335,89 | 118 | 525,85 | 523,05 | |
35 | 155,97 | 153,18 | 77 | 343,14 | 340,34 | 119 | 530,3 | 527,51 | |
36 | 160,43 | 157,63 | 78 | 347,59 | 344,8 | 120 | 534,76 | 531,97 | |
37 | 164,88 | 162,09 | 79 | 352,05 | 349,26 | 121 | 539,22 | 536,42 | |
38 | 169,34 | 166,55 | 80 | 356,51 | 353,71 | 122 | 543,67 | 540,88 | |
39 | 173,8 | 171 | 81 | 360,96 | 358,17 | 123 | 548,13 | 545,34 | |
40 | 178,25 | 175,46 | 82 | 365,42 | 362,63 | 124 | 552,59 | 549,79 | |
41 | 182,71 | 179,92 | 83 | 369,88 | 367,08 | 125 | 557,04 | 554,25 | |
42 | 187,17 | 184,37 | 84 | 374,33 | 371,54 | 126 | 561,5 | 558,7 | |
43 | 191,62 | 188,83 | 85 | 378,79 | 375,99 | 127 | 565,96 | 563,16 | |
44 | 196,08 | 193,28 | 86 | 383,25 | 380,45 | 128 | 570,41 | 567,62 | |
45 | 200,54 | 87 | 387,7 | 384,91 | 129 | 574,87 | 572,07 | ||
46 | 204,99 | 202,2 | 88 | 392,16 | 389,36 | 130 | 579,32 | 576,53 | |
47 | 209,45 | 206,65 | 89 | 396,61 | 393,82 | 131 | 583,78 | 580,99 | |
48 | 213,9 | 211,11 | 90 | 401,07 | 398,28 | 132 | 588,24 | 585,44 | |
49 | 218,36 | 215,57 | 91 | 405,53 | 402,73 | 133 | 592,69 | 589,9 | |
50 | 222,82 | 220,02 | 92 | 409,98 | 407,19 | 134 | 597,15 | 594,36 | |
51 | 227,27 | 224,48 | 93 | 414,44 | 411,65 | 135 | 601,61 | 598,81 | |
52 | 231,73 | 228,94 | 94 | 418,9 | 416,1 | 136 | 606,06 | 603,27 | |
53 | 236,19 | 233,39 | 95 | 423,35 | 420,56 | 137 | 610,52 | 607,72 | |
54 | 240,64 | 237,85 | 96 | 427,81 | 425,01 | 138 | 614,97 | 612,18 | |
55 | 245,1 | 242,3 | 97 | 432,26 | 429,47 | 139 | 619,43 | 616,64 | |
56 | 249,56 | 246,76 | 98 | 436,72 | 433,93 | 140 | 623,89 | 621,09 | |
57 | 254,01 | 251,22 | 99 | 441,18 | 438,38 | 141 | 628,34 | 625,55 | |
58 | 258,47 | 255,67 | 100 | 445,63 | 442,84 | 142 | 632,8 | 630,01 | |
59 | 262,92 | 260,13 | 101 | 450,09 | 447,3 | 143 | 637,26 | 634,46 | |
60 | 267,38 | 264,59 | 102 | 454,55 | 451,75 | 144 | 641,71 | 638,92 | |
61 | 271,84 | 269,04 | 103 | 459 | 456,21 | 145 | 646,17 | 643,38 | |
62 | 276,29 | 273,5 | 104 | 463,46 | 460,67 | 146 | 650,63 | 647,83 | |
63 | 280,75 | 277,96 | 105 | 467,92 | 465,12 | 147 | 655,08 | 652,29 | |
64 | 285,21 | 282,41 | 106 | 472,37 | 469,58 | 148 | 695,54 | 656,74 | |
65 | 289,66 | 286,87 | 107 | 476,83 | 474,03 | 149 | 663,99 | 661,2 | |
66 | 294,12 | 291,32 | 108 | 481,28 | 478,49 | 150 | 668,45 | 665,66 | |
67 | 298,57 | 295,78 | 109 | 485,74 | 482,95 | ||||
68 | 303,03 | 300,24 | 110 | 490,2 | 487,4 | ||||
69 | 307,49 | 304,69 | 111 | 494,65 | 491,86 |
Tolerances of outer diameter | ||||
Outer diameter | Permitted tolerance |
Permitted rotational deviation |
Rough turning Oversize (da) + |
|
mm from | mm to | mm | mm | mm |
0 | 50 | +0,05 | 0,04 | 1 |
51 | 100 | +0,08 | 0,05 | |
101 | 150 | +0,10 | 0,07 | |
151 | 200 | +0,12 | 0,10 | |
201 | 300 | +0,15 | 0,12 | |
301 | 500 | +0,18 | +0,03 pro 100mm Outer diameter |
|
501 | ... | +0,20 |
Axial run-out tolerance | |
Outer diameter | Permitted rotational deviation |
mm | mm |
bis 101,60 | 0.1 |
above 101,60 up to 250,00 |
0,1 +0,1mm per 100mm Outer diameter |
above 251,00 | 0,25 +0,05mm per 100mm Outer diameter |
Surface Rz | |
Pitch | permitted peak-to-valley roughness Rz |
8 mm | Rz < 16 |
14 mm | Rz < 25 |
In order to achieve optimal performance and as long a service life as possible, timing belts have to be correctly installed, correctly tightened and correctly aligned. Prior to installation, it is always recommendable to inspect the belts for any possible damage resulting from transport or storage.
The Correct Mounting
Pulleys and, of course, belts themselves always have to be mounted with the correct alignment. This means that belts cannot be bent or buckled in any way, which could lead to a drop below the minimum permissible pulley diameter. That corresponds to approximately 50 mm for belts with a pitch of 8 mm and about 125 mm for those belts with a 14 mm pitch. Imbalanced drives cause a variety of belt tension problems and edge stresses and are also responsible for extreme lateral movement, the undesired wobble. All this leads to increased operating noise and more wear and tear on the belt. Therefore the parallelism error of the pulleys should only amount to a maximum of 0.5% of the centre distance. Angle accuracy is to be maintained by keeping misalignment down to 0.25° at the very most.
Pre-Tensioning The Belt Correctly
Firstly the belt always has to be tightened in line with the calculated pre-tensioning force and checked after a running-in period of about 5 minutes. The belt is then to be retightened according to the relevant value, should it have shifted or altered its position in any way. Finally after a further 8 hours of operating, the belt is to be once again inspected and, if necessary, tightened to comply with the required value that has already been calculated.
Causes of failure and corrective measures can be found in the following document:
For mounting | |||
Effective lengths | Yellow, White, Pink | Blue, Green, Orange, Red | For tightening |
< 1525 mm | - 10,0 mm | - 15,0 mm | + 3,0 mm |
> 1525 mm | - 15,0 mm | - 18,0 mm | + 5,0 mm |
Specific basic performance (kW) for belt type "Yellow" Y | ||||||||||||||||||||||||
Drive unit speed |
Drive unit teeth no./Effective diameter in (mm) | |||||||||||||||||||||||
18 | 20 | 22 | 24 | 25 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 45 | 48 | 50 | 56 | 60 | 63 | 75 | 80 | 90 | 112 | ||
Effective diameter |
45.84 | 50.93 | 56.02 | 61.12 | 63.66 | 66.21 | 71.30 | 76.39 | 81.49 | 86.58 | 91.67 | 96.77 | 101.86 | 114.59 | 122.23 | 127.32 | 142.60 | 152.79 | 160.43 | 190.99 | 203.72 | 229.18 | 285.2 | |
10 | 0.04 | 0.04 | 0.05 | 0.06 | 0.07 | 0.07 | 0.07 | 0.08 | 0.09 | 0.10 | 0.10 | 0.10 | 0.11 | 0.13 | 0.14 | 0.15 | 0.16 | 0.18 | 0.19 | 0.23 | 0.25 | 0.28 | 0.35 | |
20 | 0.07 | 0.09 | 0.10 | 0.12 | 0.13 | 0.13 | 0.15 | 0.16 | 0.17 | 0.19 | 0.20 | 0.21 | 0.22 | 0.25 | 0.28 | 0.29 | 0.33 | 0.35 | 0.37 | 0.45 | 0.48 | 0.55 | 0.69 | |
40 | 0.14 | 0.17 | 0.20 | 0.23 | 0.25 | 0.26 | 0.29 | 0.31 | 0.34 | 0.37 | 0.39 | 0.42 | 0.44 | 0.51 | 0.54 | 0.57 | 0.64 | 0.69 | 0.73 | 0.9 | 0.9 | 1.1 | 1.4 | |
60 | 0.21 | 0.25 | 0.30 | 0.34 | 0.37 | 0.39 | 0.42 | 0.46 | 0.50 | 0.54 | 0.57 | 0.61 | 0.65 | 0.7 | 0.8 | 0.8 | 1.0 | 1.0 | 1.1 | 1.3 | 1.4 | 1.6 | 2.0 | |
100 | 0.34 | 0.41 | 0.48 | 0.55 | 0.59 | 0.63 | 0.69 | 0.7 | 0.8 | 0.9 | 0.9 | 1.0 | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.7 | 1.8 | 2.1 | 2.3 | 2.6 | 3.2 | |
200 | 0.6 | 0.8 | 0.9 | 1.0 | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 1.7 | 1.8 | 2.0 | 2.2 | 2.4 | 2.5 | 2.9 | 3.1 | 3.3 | 3.9 | 4.2 | 4.8 | 6.0 | |
300 | 0.9 | 1.1 | 1.3 | 1.5 | 1.6 | 1.7 | 1.8 | 2.0 | 2.1 | 2.3 | 2.5 | 2.6 | 2.8 | 3.2 | 3.4 | 3.6 | 4.1 | 4.4 | 4.6 | 5.6 | 6.0 | 6.8 | 9 | |
400 | 1.2 | 1.4 | 1.6 | 1.9 | 2.0 | 2.1 | 2.3 | 2.5 | 2.7 | 2.9 | 3.1 | 3.3 | 3.5 | 4.1 | 4.4 | 4.6 | 5.2 | 5.6 | 5.9 | 7.1 | 8 | 9 | 11 | |
500 | 1.4 | 1.7 | 1.9 | 2.2 | 2.4 | 2.5 | 2.8 | 3.0 | 3.3 | 3.5 | 3.8 | 4.0 | 4.3 | 4.9 | 5.2 | 5.5 | 6.2 | 6.7 | 7.1 | 9 | 9 | 10 | 13 | |
600 | 1.6 | 1.9 | 2.3 | 2.6 | 2.8 | 2.9 | 3.2 | 3.5 | 3.8 | 4.1 | 4.4 | 4.7 | 4.9 | 5.7 | 6.1 | 6.4 | 7.2 | 8 | 8 | 10 | 11 | 12 | 15 | |
700 | 1.8 | 2.2 | 2.6 | 2.9 | 3.1 | 3.3 | 3.7 | 4.0 | 4.3 | 4.6 | 4.9 | 5.3 | 5.6 | 6.4 | 6.9 | 7.2 | 8 | 9 | 9 | 11 | 12 | 14 | 17 | |
800 | 2.0 | 2.4 | 2.8 | 3.3 | 3.5 | 3.7 | 4.1 | 4.4 | 4.8 | 5.1 | 5.5 | 5.9 | 6.2 | 7.1 | 8 | 8 | 9 | 10 | 10 | 13 | 13 | 15 | 19 | |
870 | 2.2 | 2.6 | 3.0 | 3.5 | 3.7 | 4.0 | 4.4 | 4.7 | 5.1 | 5.5 | 5.9 | 6.3 | 6.7 | 8 | 8 | 9 | 10 | 10 | 11 | 13 | 14 | 16 | 20 | |
1000 | 2.4 | 2.9 | 3.4 | 3.9 | 4.2 | 4.4 | 4.9 | 5.3 | 5.7 | 6.2 | 6.6 | 7.0 | 7 | 9 | 9 | 10 | 11 | 12 | 12 | 15 | 16 | 18 | 23 | |
1160 | 2.7 | 3.3 | 3.8 | 4.4 | 4.7 | 5.0 | 5.5 | 6.0 | 6.5 | 6.9 | 7 | 8 | 8 | 10 | 10 | 11 | 12 | 13 | 14 | 17 | 18 | 20 | 26 | |
1200 | 2.8 | 3.4 | 3.9 | 4.5 | 4.8 | 5.1 | 5.6 | 6.1 | 6.6 | 7.1 | 8 | 8 | 9 | 10 | 11 | 11 | 13 | 14 | 14 | 17 | 18 | 21 | 26 | |
1400 | 3.2 | 3.8 | 4.5 | 5.1 | 5.5 | 5.8 | 6.4 | 7.0 | 8 | 8 | 9 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 20 | 21 | 24 | 30 | |
1600 | 3.6 | 4.3 | 5.0 | 5.7 | 6.1 | 6.5 | 7.1 | 8 | 8 | 9 | 10 | 10 | 11 | 12 | 13 | 14 | 16 | 17 | 18 | 22 | 23 | 26 | 33 | |
1750 | 3.8 | 4.6 | 5.4 | 6.2 | 6.6 | 7.0 | 8 | 8 | 9 | 10 | 10 | 11 | 12 | 13 | 14 | 15 | 17 | 18 | 19 | 23 | 25 | 28 | 35 | |
2000 | 4.3 | 5.1 | 6.0 | 6.9 | 7.3 | 8 | 9 | 9 | 10 | 11 | 12 | 12 | 13 | 15 | 16 | 17 | 19 | 20 | 22 | 26 | 28 | 31 | 39 | |
2400 | 5.0 | 6.0 | 7.0 | 8 | 9 | 9 | 10 | 11 | 12 | 13 | 13 | 14 | 15 | 17 | 19 | 19 | 22 | 24 | 25 | 30 | 32 | 36 | 44 | |
2800 | 5.7 | 6.8 | 8 | 9 | 10 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 20 | 21 | 22 | 25 | 27 | 28 | 34 | 36 | 40 | 49 | |
3200 | 6.4 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 22 | 24 | 25 | 28 | 30 | 31 | 37 | 40 | 44 | 53 | |
3500 | 6.9 | 8 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 20 | 21 | 24 | 25 | 26 | 30 | 32 | 34 | 40 | 42 | 47 | 56 | |
4000 | 8 | 9 | 11 | 12 | 13 | 14 | 15 | 17 | 18 | 19 | 21 | 22 | 23 | 26 | 28 | 29 | 33 | 35 | 37 | 44 | 46 | 51 | 59 | |
4500 | 9 | 10 | 12 | 14 | 15 | 16 | 17 | 18 | 20 | 21 | 23 | 24 | 26 | 29 | 31 | 32 | 36 | 39 | 40 | 47 | 50 | 54 | 61 | |
5000 | 9 | 11 | 13 | 15 | 16 | 17 | 19 | 20 | 22 | 23 | 25 | 26 | 28 | 31 | 34 | 35 | 39 | 42 | 43 | 50 | 52 | 56 | 61 | |
5500 | 10 | 12 | 14 | 16 | 17 | 18 | 20 | 22 | 24 | 25 | 27 | 28 | 30 | 34 | 36 | 38 | 42 | 44 | 46 | 52 | 55 | 58 | 60 | |
6000 | 11 | 13 | 15 | 18 | 19 | 20 | 22 | 23 | 25 | 27 | 29 | 30 | 32 | 36 | 38 | 40 | 44 | 47 | 48 | 54 | 56 | 59 | 57 | |
7000 | 13 | 15 | 17 | 20 | 21 | 23 | 25 | 27 | 29 | 31 | 32 | 34 | 36 | 40 | 43 | 44 | 48 | 50 | 52 | 56 | 57 | 56 | 44 | |
8000 | 14 | 17 | 20 | 22 | 24 | 25 | 27 | 30 | 32 | 34 | 36 | 38 | 40 | 44 | 46 | 47 | 51 | 53 | 54 | 55 | 54 | 49 | ||
10000 | 17 | 20 | 24 | 27 | 28 | 30 | 33 | 35 | 37 | 39 | 41 | 43 | 45 | 48 | 50 | 51 | 52 | 52 | 51 | |||||
15000 | 23 | 27 | 31 | 35 | 37 | 39 | 41 | 43 | 45 | 46 | 46 | 47 | 46 | 43 | 40 | 36 | 23 | |||||||
20000 | 27 | 32 | 35 | 38 | 40 | 41 | 42 | 41 | 40 | 38 | 34 | 30 | ||||||||||||
Shorter service intervals due to increased bending! | ||||||||||||||||||||||||
ATTENTION! Below the stairway line no use of windscreen material GG (Belt speed > 33 m/s) |
Specific basic performance (kW) for belt type "White" W | ||||||||||||||||||||||||
Drive unit speed |
Drive unit teeth no./Effective diameter in (mm) | |||||||||||||||||||||||
18 | 20 | 22 | 24 | 25 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 45 | 48 | 50 | 56 | 60 | 63 | 75 | 80 | 90 | 112 | ||
Effective diameter |
45.84 | 50.93 | 56.02 | 61.12 | 63.66 | 66.21 | 71.30 | 76.39 | 81.49 | 86.58 | 91.67 | 96.77 | 101.86 | 114.59 | 122.23 | 127.32 | 142.60 | 152.79 | 160.43 | 190.99 | 203.72 | 229.18 | 285.2 | |
10 | 0.07 | 0.09 | 0.10 | 0.12 | 0.13 | 0.13 | 0.15 | 0.16 | 0.18 | 0.19 | 0.19 | 0.21 | 0.22 | 0.25 | 0.28 | 0.30 | 0.33 | 0.36 | 0.37 | 0.46 | 0.49 | 0.55 | 0.70 | |
20 | 0.15 | 0.18 | 0.21 | 0.24 | 0.25 | 0.27 | 0.30 | 0.31 | 0.34 | 0.37 | 0.40 | 0.42 | 0.45 | 0.51 | 0.55 | 0.58 | 0.66 | 0.70 | 0.7 | 0.9 | 1.0 | 1.1 | 1.4 | |
40 | 0.28 | 0.34 | 0.40 | 0.46 | 0.49 | 0.52 | 0.58 | 0.63 | 0.67 | 0.73 | 0.8 | 0.8 | 0.9 | 1.0 | 1.1 | 1.1 | 1.3 | 1.4 | 1.5 | 1.8 | 1.9 | 2.2 | 2.7 | |
60 | 0.42 | 0.51 | 0.60 | 0.69 | 0.73 | 0.8 | 0.8 | 0.9 | 1.0 | 1.1 | 1.1 | 1.2 | 1.3 | 1.5 | 1.6 | 1.7 | 1.9 | 2.1 | 2.2 | 2.6 | 2.8 | 3.2 | 4.0 | |
100 | 0.69 | 0.8 | 1.0 | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 1.7 | 1.9 | 2.0 | 2.1 | 2.4 | 2.6 | 2.7 | 3.1 | 3.3 | 3.5 | 4.2 | 4.5 | 5.1 | 6.5 | |
200 | 1.3 | 1.5 | 1.8 | 2.1 | 2.2 | 2.3 | 2.6 | 2.8 | 3.0 | 3.2 | 3.5 | 3.7 | 3.9 | 4.5 | 4.8 | 5.1 | 5.8 | 6.2 | 6.5 | 8 | 8 | 10 | 12 | |
300 | 1.8 | 2.2 | 2.5 | 2.9 | 3.1 | 3.3 | 3.7 | 4.0 | 4.3 | 4.6 | 4.9 | 5.3 | 5.6 | 6.4 | 6.9 | 7.2 | 8 | 9 | 9 | 11 | 12 | 14 | 17 | |
400 | 2.3 | 2.8 | 3.2 | 3.7 | 4.0 | 4.2 | 4.6 | 5.1 | 5.5 | 5.9 | 6.3 | 6.7 | 7.1 | 8 | 9 | 9 | 10 | 11 | 12 | 14 | 15 | 17 | 22 | |
500 | 2.8 | 3.3 | 3.9 | 4.5 | 4.8 | 5.1 | 5.6 | 6.1 | 6.6 | 7.0 | 8 | 8 | 9 | 10 | 10 | 11 | 12 | 13 | 14 | 17 | 18 | 21 | 26 | |
600 | 3.2 | 3.9 | 4.5 | 5.2 | 5.5 | 5.9 | 6.5 | 7.0 | 8 | 8 | 9 | 9 | 10 | 11 | 12 | 13 | 14 | 16 | 16 | 20 | 21 | 24 | 30 | |
700 | 3.7 | 4.4 | 5.1 | 5.9 | 6.3 | 6.7 | 7.3 | 8 | 9 | 9 | 10 | 11 | 11 | 13 | 14 | 14 | 16 | 18 | 19 | 22 | 24 | 27 | 34 | |
800 | 4.1 | 4.9 | 5.7 | 6.5 | 7.0 | 7 | 8 | 9 | 10 | 10 | 11 | 12 | 12 | 14 | 15 | 16 | 18 | 20 | 21 | 25 | 27 | 30 | 38 | |
870 | 4.4 | 5.2 | 6.1 | 7.0 | 7 | 8 | 9 | 9 | 10 | 11 | 12 | 13 | 13 | 15 | 16 | 17 | 19 | 21 | 22 | 27 | 29 | 32 | 41 | |
1000 | 4.9 | 5.8 | 6.8 | 8 | 8 | 9 | 10 | 11 | 11 | 12 | 13 | 14 | 15 | 17 | 18 | 19 | 22 | 23 | 25 | 30 | 32 | 36 | 45 | |
1160 | 5.5 | 6.6 | 8 | 9 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 19 | 21 | 22 | 24 | 26 | 28 | 34 | 36 | 41 | 51 | |
1200 | 5.6 | 6.7 | 8 | 9 | 10 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 20 | 21 | 22 | 25 | 27 | 29 | 35 | 37 | 42 | 52 | |
1400 | 6.4 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 20 | 22 | 24 | 25 | 28 | 31 | 32 | 39 | 42 | 47 | 59 | |
1600 | 7.1 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 17 | 18 | 19 | 21 | 22 | 25 | 27 | 28 | 32 | 34 | 36 | 43 | 46 | 52 | 65 | |
1750 | 8 | 9 | 11 | 12 | 13 | 14 | 15 | 17 | 18 | 19 | 21 | 22 | 23 | 27 | 29 | 30 | 34 | 37 | 39 | 47 | 50 | 56 | 70 | |
2000 | 9 | 10 | 12 | 14 | 15 | 16 | 17 | 19 | 20 | 22 | 23 | 25 | 26 | 30 | 32 | 34 | 38 | 41 | 43 | 52 | 55 | 62 | 77 | |
2400 | 10 | 12 | 14 | 16 | 17 | 18 | 20 | 22 | 23 | 25 | 27 | 29 | 30 | 35 | 37 | 39 | 44 | 47 | 50 | 60 | 64 | 72 | 88 | |
2800 | 11 | 14 | 16 | 18 | 19 | 21 | 23 | 25 | 27 | 29 | 31 | 33 | 34 | 39 | 42 | 44 | 50 | 54 | 56 | 67 | 72 | 80 | 98 | |
3200 | 13 | 15 | 18 | 20 | 22 | 23 | 25 | 28 | 30 | 32 | 34 | 36 | 39 | 44 | 47 | 49 | 55 | 60 | 63 | 74 | 79 | 88 | 106 | |
3500 | 14 | 16 | 19 | 22 | 24 | 25 | 27 | 30 | 32 | 35 | 37 | 39 | 42 | 47 | 51 | 53 | 60 | 64 | 67 | 79 | 84 | 94 | 111 | |
4000 | 15 | 18 | 22 | 25 | 26 | 28 | 31 | 33 | 36 | 39 | 41 | 44 | 46 | 53 | 56 | 59 | 66 | 71 | 74 | 87 | 92 | 101 | 118 | |
4500 | 17 | 20 | 24 | 27 | 29 | 31 | 34 | 37 | 40 | 43 | 45 | 48 | 51 | 58 | 62 | 65 | 72 | 77 | 81 | 94 | 99 | 108 | 122 | |
5000 | 19 | 22 | 26 | 30 | 32 | 34 | 37 | 40 | 43 | 47 | 50 | 53 | 56 | 63 | 67 | 70 | 78 | 83 | 87 | 100 | 105 | 113 | 123 | |
5500 | 20 | 24 | 28 | 33 | 35 | 37 | 40 | 44 | 47 | 50 | 54 | 57 | 60 | 68 | 72 | 75 | 83 | 89 | 92 | 105 | 109 | 116 | 120 | |
6000 | 22 | 26 | 31 | 35 | 37 | 40 | 43 | 47 | 51 | 54 | 58 | 61 | 64 | 72 | 77 | 80 | 88 | 93 | 97 | 109 | 112 | 117 | 113 | |
7000 | 25 | 30 | 35 | 40 | 43 | 45 | 49 | 53 | 57 | 61 | 65 | 69 | 72 | 81 | 85 | 88 | 96 | 101 | 104 | 112 | 114 | 113 | 88 | |
8000 | 28 | 34 | 39 | 45 | 48 | 50 | 55 | 59 | 64 | 68 | 72 | 75 | 79 | 87 | 92 | 95 | 102 | 106 | 108 | 110 | 108 | 98 | ||
10000 | 34 | 41 | 47 | 54 | 57 | 60 | 65 | 70 | 74 | 79 | 83 | 86 | 90 | 97 | 100 | 102 | 105 | 104 | 103 | |||||
15000 | 47 | 55 | 63 | 70 | 74 | 78 | 82 | 86 | 89 | 91 | 93 | 93 | 93 | 86 | 79 | 73 | 46 | |||||||
20000 | 55 | 63 | 70 | 77 | 80 | 82 | 83 | 83 | 80 | 76 | 69 | 60 | ||||||||||||
Shorter service intervals due to increased bending! | ||||||||||||||||||||||||
ATTENTION! Below the stairway line no use of windscreen material GG (Belt speed > 33 m/s) |
Specific basic performance (kW) for belt type "Pink" P | ||||||||||||||||||||||||
Drive unit speed |
Drive unit teeth no./Effective diameter in (mm) | |||||||||||||||||||||||
18 | 20 | 22 | 24 | 25 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 45 | 48 | 50 | 56 | 60 | 63 | 75 | 80 | 90 | 112 | ||
Effective diameter |
45.84 | 50.93 | 56.02 | 61.12 | 63.66 | 66.21 | 71.30 | 76.39 | 81.49 | 86.58 | 91.67 | 96.77 | 101.86 | 114.59 | 122.23 | 127.32 | 142.60 | 152.79 | 160.43 | 190.99 | 203.72 | 229.18 | 285.2 | |
10 | 0.15 | 0.18 | 0.21 | 0.24 | 0.27 | 0.27 | 0.30 | 0.33 | 0.36 | 0.39 | 0.39 | 0.42 | 0.45 | 0.51 | 0.57 | 0.60 | 0.66 | 0.72 | 0.75 | 0.92 | 0.98 | 1.10 | 1.40 | |
20 | 0.30 | 0.36 | 0.42 | 0.48 | 0.51 | 0.54 | 0.60 | 0.63 | 0.69 | 0.75 | 0.80 | 0.83 | 0.89 | 1.01 | 1.10 | 1.16 | 1.31 | 1.40 | 1.5 | 1.8 | 1.9 | 2.2 | 2.8 | |
40 | 0.57 | 0.69 | 0.80 | 0.92 | 0.98 | 1.04 | 1.16 | 1.25 | 1.34 | 1.46 | 1.5 | 1.7 | 1.8 | 2.0 | 2.2 | 2.3 | 2.6 | 2.8 | 2.9 | 3.5 | 3.8 | 4.3 | 5.4 | |
60 | 0.83 | 1.01 | 1.19 | 1.37 | 1.46 | 1.5 | 1.7 | 1.8 | 2.0 | 2.1 | 2.3 | 2.4 | 2.6 | 3.0 | 3.2 | 3.3 | 3.8 | 4.1 | 4.3 | 5.2 | 5.6 | 6.3 | 8.0 | |
100 | 1.37 | 1.6 | 1.9 | 2.2 | 2.4 | 2.5 | 2.7 | 3.0 | 3.2 | 3.5 | 3.7 | 4.0 | 4.2 | 4.8 | 5.2 | 5.4 | 6.1 | 6.6 | 7.0 | 8.5 | 9.1 | 10.3 | 12.9 | |
200 | 2.6 | 3.1 | 3.6 | 4.1 | 4.4 | 4.7 | 5.1 | 5.6 | 6.0 | 6.5 | 6.9 | 7.4 | 7.9 | 9.0 | 9.7 | 10.1 | 11.5 | 12.4 | 13.1 | 16 | 17 | 19 | 24 | |
300 | 3.6 | 4.4 | 5.1 | 5.8 | 6.3 | 6.6 | 7.3 | 7.9 | 8.6 | 9.2 | 9.9 | 10.5 | 11.1 | 12.8 | 13.7 | 14.4 | 16 | 18 | 19 | 22 | 24 | 27 | 34 | |
400 | 4.6 | 5.5 | 6.5 | 7.4 | 8.0 | 8.5 | 9.3 | 10.1 | 10.9 | 11.7 | 12.5 | 13.4 | 14.2 | 16 | 17 | 18 | 21 | 22 | 24 | 29 | 31 | 35 | 44 | |
500 | 5.5 | 6.6 | 7.8 | 8.9 | 9.5 | 10.2 | 11.1 | 12.1 | 13.1 | 14.1 | 15 | 16 | 17 | 20 | 21 | 22 | 25 | 27 | 28 | 34 | 37 | 42 | 52 | |
600 | 6.4 | 7.7 | 9.0 | 10.4 | 11.1 | 11.8 | 12.9 | 14.1 | 15 | 16 | 17 | 19 | 20 | 23 | 24 | 25 | 29 | 31 | 33 | 40 | 43 | 48 | 61 | |
700 | 7.3 | 8.7 | 10.2 | 11.7 | 12.5 | 13.4 | 14.6 | 16 | 17 | 19 | 20 | 21 | 22 | 26 | 28 | 29 | 33 | 35 | 37 | 45 | 48 | 55 | 69 | |
800 | 8.1 | 9.7 | 11.4 | 13.1 | 13.9 | 15 | 16 | 18 | 19 | 21 | 22 | 23 | 25 | 29 | 31 | 32 | 36 | 39 | 41 | 50 | 54 | 61 | 76 | |
870 | 8.7 | 10.4 | 12.2 | 14.0 | 15 | 16 | 17 | 19 | 21 | 22 | 24 | 25 | 27 | 30 | 33 | 34 | 39 | 42 | 44 | 53 | 57 | 65 | 82 | |
1000 | 9.7 | 11.6 | 13.6 | 16 | 17 | 18 | 19 | 21 | 23 | 25 | 26 | 28 | 30 | 34 | 37 | 38 | 44 | 47 | 49 | 60 | 64 | 72 | 91 | |
1160 | 11.0 | 13.1 | 15 | 18 | 19 | 20 | 22 | 24 | 26 | 28 | 30 | 32 | 34 | 38 | 41 | 43 | 49 | 53 | 56 | 67 | 72 | 81 | 102 | |
1200 | 11.3 | 13.5 | 16 | 18 | 19 | 21 | 23 | 25 | 27 | 29 | 31 | 33 | 34 | 39 | 42 | 44 | 50 | 54 | 57 | 69 | 74 | 84 | 105 | |
1400 | 12.8 | 15 | 18 | 21 | 22 | 23 | 26 | 28 | 30 | 32 | 35 | 37 | 39 | 45 | 48 | 50 | 57 | 61 | 65 | 78 | 83 | 94 | 118 | |
1600 | 14.2 | 17 | 20 | 23 | 24 | 26 | 28 | 31 | 33 | 36 | 39 | 41 | 44 | 50 | 53 | 56 | 63 | 68 | 72 | 87 | 93 | 105 | 131 | |
1750 | 15 | 18 | 21 | 25 | 26 | 28 | 31 | 33 | 36 | 39 | 41 | 44 | 47 | 54 | 58 | 60 | 68 | 73 | 77 | 93 | 100 | 112 | 140 | |
2000 | 17 | 20 | 24 | 28 | 29 | 31 | 34 | 37 | 40 | 43 | 46 | 49 | 52 | 60 | 64 | 67 | 76 | 82 | 86 | 103 | 111 | 125 | 155 | |
2400 | 20 | 24 | 28 | 32 | 34 | 36 | 40 | 43 | 47 | 50 | 54 | 57 | 61 | 69 | 74 | 78 | 88 | 95 | 100 | 119 | 127 | 143 | 176 | |
2800 | 23 | 27 | 32 | 37 | 39 | 41 | 45 | 49 | 53 | 57 | 61 | 65 | 69 | 79 | 84 | 88 | 100 | 107 | 113 | 135 | 143 | 160 | 195 | |
3200 | 25 | 30 | 36 | 41 | 44 | 46 | 51 | 55 | 60 | 64 | 68 | 73 | 77 | 88 | 94 | 98 | 111 | 119 | 125 | 149 | 158 | 176 | 212 | |
3500 | 27 | 33 | 38 | 44 | 47 | 50 | 55 | 60 | 64 | 69 | 74 | 78 | 83 | 95 | 101 | 106 | 119 | 128 | 134 | 159 | 169 | 187 | 222 | |
4000 | 31 | 37 | 43 | 50 | 53 | 56 | 61 | 67 | 72 | 77 | 82 | 88 | 93 | 105 | 113 | 118 | 132 | 142 | 148 | 174 | 184 | 203 | 236 | |
4500 | 34 | 41 | 48 | 55 | 58 | 62 | 68 | 74 | 80 | 85 | 91 | 97 | 102 | 116 | 124 | 129 | 145 | 154 | 162 | 188 | 198 | 216 | 243 | |
5000 | 37 | 45 | 52 | 60 | 64 | 68 | 74 | 81 | 87 | 93 | 99 | 105 | 111 | 126 | 134 | 140 | 156 | 166 | 174 | 200 | 210 | 226 | 245 | |
5500 | 41 | 49 | 57 | 65 | 69 | 74 | 81 | 87 | 94 | 101 | 107 | 114 | 120 | 136 | 144 | 150 | 167 | 177 | 184 | 210 | 219 | 232 | 240 | |
6000 | 44 | 53 | 61 | 70 | 75 | 79 | 87 | 94 | 101 | 108 | 115 | 122 | 129 | 145 | 154 | 160 | 176 | 187 | 194 | 217 | 225 | 234 | 227 | |
7000 | 50 | 60 | 70 | 80 | 85 | 90 | 99 | 107 | 115 | 122 | 130 | 137 | 144 | 161 | 170 | 176 | 193 | 202 | 208 | 225 | 228 | 225 | 176 | |
8000 | 57 | 67 | 78 | 90 | 95 | 101 | 110 | 119 | 127 | 135 | 143 | 151 | 158 | 175 | 184 | 190 | 204 | 211 | 216 | 221 | 217 | 197 | ||
10000 | 68 | 81 | 94 | 107 | 114 | 120 | 130 | 140 | 149 | 157 | 165 | 173 | 180 | 194 | 200 | 204 | 209 | 209 | 206 | |||||
15000 | 93 | 109 | 125 | 140 | 148 | 155 | 165 | 172 | 178 | 183 | 186 | 186 | 185 | 173 | 159 | 146 | 92 | |||||||
20000 | 110 | 126 | 141 | 154 | 159 | 165 | 167 | 165 | 160 | 151 | 138 | 120 | ||||||||||||
Shorter service intervals due to increased bending! | ||||||||||||||||||||||||
ATTENTION! Below the stairway line no use of windscreen material GG (Belt speed > 33 m/s) |
Specific basic performance (kW) for belt type "Blue" B | ||||||||||||||||||||||
Drive unit speed |
Drive unit teeth no./Effective diameter in (mm) | |||||||||||||||||||||
24 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 43 | 45 | 48 | 50 | 56 | 60 | 63 | 71 | 75 | 80 | 90 | 112 | ||
Effective diameter |
106.95 | 115.86 | 124.78 | 133.69 | 142.60 | 151.52 | 160.43 | 169.34 | 178.25 | 191.62 | 200.54 | 213.90 | 222.82 | 249.55 | 267.38 | 280.75 | 316.40 | 334.23 | 356.51 | 401.07 | 499.11 | |
10 | 0.4 | 0.4 | 0.5 | 0.5 | 0.6 | 0.7 | 0.7 | 0.8 | 0.8 | 0.9 | 0.9 | 1.0 | 1.0 | 1.2 | 1.2 | 1.3 | 1.5 | 1.6 | 1.7 | 1.9 | 2.4 | |
20 | 0.8 | 0.9 | 1.0 | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 1.7 | 1.8 | 2.0 | 2.0 | 2.3 | 2.5 | 2.6 | 2.9 | 3.1 | 3.3 | 3.8 | 4.7 | |
40 | 1.5 | 1.7 | 1.9 | 2.1 | 2.3 | 2.5 | 2.8 | 3.0 | 3.2 | 3.4 | 3.6 | 3.8 | 4.0 | 4.5 | 4.8 | 5.1 | 5.8 | 6.1 | 6.5 | 7.4 | 9 | |
60 | 2.3 | 2.5 | 2.8 | 3.1 | 3.4 | 3.8 | 4.1 | 4.4 | 4.7 | 5.0 | 5.3 | 5.7 | 5.9 | 6.7 | 7.2 | 8 | 9 | 9 | 10 | 11 | 14 | |
100 | 3.7 | 4.1 | 4.6 | 5.1 | 5.6 | 6.1 | 6.6 | 7.1 | 8 | 8 | 9 | 9 | 10 | 11 | 12 | 12 | 14 | 15 | 16 | 18 | 22 | |
200 | 6.8 | 8 | 9 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 20 | 22 | 23 | 26 | 27 | 29 | 33 | 41 | |
300 | 10 | 11 | 12 | 13 | 15 | 16 | 17 | 19 | 20 | 21 | 22 | 24 | 25 | 28 | 30 | 32 | 36 | 38 | 41 | 46 | 58 | |
400 | 12 | 14 | 15 | 17 | 19 | 20 | 22 | 24 | 25 | 27 | 29 | 31 | 32 | 36 | 39 | 41 | 46 | 49 | 52 | 59 | 73 | |
500 | 15 | 16 | 18 | 20 | 22 | 24 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 43 | 46 | 48 | 55 | 58 | 62 | 70 | 87 | |
600 | 17 | 19 | 21 | 23 | 26 | 28 | 30 | 33 | 35 | 37 | 39 | 42 | 44 | 49 | 53 | 56 | 63 | 67 | 72 | 81 | 101 | |
700 | 19 | 21 | 24 | 26 | 29 | 32 | 34 | 37 | 39 | 42 | 44 | 47 | 50 | 56 | 60 | 63 | 71 | 75 | 81 | 91 | 113 | |
800 | 21 | 24 | 26 | 29 | 32 | 35 | 38 | 41 | 43 | 47 | 49 | 53 | 55 | 62 | 66 | 70 | 79 | 83 | 89 | 100 | 125 | |
870 | 23 | 25 | 28 | 31 | 34 | 37 | 40 | 44 | 46 | 50 | 52 | 56 | 59 | 66 | 71 | 74 | 84 | 89 | 95 | 107 | 133 | |
1000 | 25 | 28 | 31 | 35 | 38 | 41 | 45 | 49 | 51 | 56 | 58 | 62 | 65 | 73 | 79 | 83 | 93 | 99 | 105 | 118 | 147 | |
1160 | 28 | 32 | 35 | 39 | 43 | 46 | 50 | 55 | 58 | 62 | 65 | 70 | 73 | 82 | 88 | 92 | 104 | 110 | 117 | 132 | 163 | |
1200 | 29 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 59 | 64 | 67 | 72 | 75 | 84 | 90 | 95 | 107 | 113 | 120 | 135 | 167 | |
1400 | 32 | 36 | 41 | 45 | 49 | 54 | 58 | 63 | 66 | 72 | 75 | 80 | 84 | 94 | 101 | 106 | 120 | 126 | 135 | 151 | 185 | |
1600 | 36 | 40 | 45 | 50 | 54 | 59 | 64 | 70 | 74 | 79 | 83 | 89 | 93 | 104 | 111 | 117 | 132 | 139 | 148 | 165 | 201 | |
1750 | 39 | 43 | 48 | 53 | 58 | 64 | 69 | 75 | 79 | 85 | 89 | 95 | 99 | 111 | 119 | 125 | 140 | 148 | 157 | 175 | 213 | |
2000 | 43 | 48 | 53 | 59 | 65 | 70 | 76 | 83 | 87 | 94 | 98 | 105 | 109 | 123 | 131 | 137 | 154 | 162 | 172 | 191 | 229 | |
2400 | 49 | 55 | 61 | 68 | 74 | 81 | 88 | 95 | 100 | 108 | 113 | 120 | 125 | 140 | 149 | 156 | 174 | 183 | 193 | 212 | 248 | |
2800 | 56 | 62 | 69 | 76 | 84 | 91 | 99 | 107 | 112 | 121 | 126 | 134 | 140 | 155 | 165 | 173 | 191 | 200 | 210 | 228 | 257 | |
3200 | 62 | 69 | 77 | 85 | 93 | 101 | 109 | 118 | 124 | 133 | 139 | 148 | 153 | 170 | 180 | 187 | 206 | 214 | 223 | 239 | 256 | |
3500 | 66 | 74 | 82 | 91 | 99 | 108 | 117 | 126 | 133 | 142 | 148 | 157 | 163 | 179 | 190 | 197 | 215 | 222 | 231 | 243 | 248 | |
4000 | 74 | 83 | 91 | 101 | 110 | 119 | 129 | 139 | 146 | 156 | 162 | 171 | 177 | 193 | 203 | 210 | 225 | 231 | 236 | 241 | 218 | |
4500 | 81 | 90 | 100 | 110 | 120 | 130 | 140 | 151 | 158 | 168 | 174 | 183 | 189 | 205 | 213 | 219 | 230 | 233 | 234 | 228 | 166 | |
5000 | 88 | 98 | 108 | 118 | 129 | 140 | 150 | 161 | 169 | 179 | 185 | 194 | 199 | 212 | 219 | 223 | 228 | 227 | 222 | 201 | ||
6000 | 100 | 112 | 123 | 134 | 145 | 157 | 168 | 179 | 186 | 195 | 200 | 207 | 210 | 217 | 218 | 216 | 202 | 189 | 167 | |||
7000 | 112 | 124 | 135 | 147 | 159 | 170 | 181 | 192 | 197 | 204 | 207 | 209 | 210 | 205 | 195 | 185 | 141 | |||||
8000 | 122 | 134 | 145 | 157 | 168 | 179 | 189 | 198 | 201 | 203 | 203 | 200 | 195 | 173 | 149 | 126 | ||||||
10000 | 136 | 147 | 157 | 166 | 174 | 181 | 186 | 189 | 184 | 171 | 159 | 136 | 117 | |||||||||
12000 | 141 | 148 | 154 | 158 | 159 | 157 | 153 | 145 | 126 | |||||||||||||
Shorter service intervals due to increased bending! | ||||||||||||||||||||||
ATTENTION! Below the stairway line no use of windscreen material GG (Belt speed > 33 m/s) |
Specific basic performance (kW) for belt type "Green" G | ||||||||||||||||||||||
Drive unit speed |
Drive unit teeth no./Effective diameter in (mm) | |||||||||||||||||||||
24 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 43 | 45 | 48 | 50 | 56 | 60 | 63 | 71 | 75 | 80 | 90 | 112 | ||
Effective diameter |
106.95 | 115.86 | 124.78 | 133.69 | 142.60 | 151.52 | 160.43 | 169.34 | 178.25 | 191.62 | 200.54 | 213.90 | 222.82 | 249.55 | 267.38 | 280.75 | 316.40 | 334.23 | 356.51 | 401.07 | 499.11 | |
10 | 0.6 | 0.7 | 0.7 | 0.8 | 0.9 | 1.0 | 1.1 | 1.2 | 1.2 | 1.3 | 1.4 | 1.5 | 1.5 | 1.7 | 1.9 | 2.0 | 2.2 | 2.4 | 2.5 | 2.8 | 3.6 | |
20 | 1.2 | 1.3 | 1.5 | 1.6 | 1.8 | 1.9 | 2.1 | 2.3 | 2.4 | 2.6 | 2.7 | 2.9 | 3.1 | 3.4 | 3.7 | 3.9 | 4.4 | 4.7 | 5.0 | 5.6 | 7.0 | |
40 | 2.3 | 2.6 | 2.9 | 3.2 | 3.5 | 3.8 | 4.1 | 4.5 | 4.7 | 5.1 | 5.4 | 5.8 | 6.0 | 6.8 | 7.3 | 8 | 9 | 9 | 10 | 11 | 14 | |
60 | 3.4 | 3.8 | 4.3 | 4.7 | 5.2 | 5.6 | 6.1 | 6.6 | 7.0 | 8 | 8 | 8 | 9 | 10 | 11 | 11 | 13 | 14 | 14 | 16 | 20 | |
100 | 5.5 | 6.2 | 6.9 | 8 | 8 | 9 | 10 | 11 | 11 | 12 | 13 | 14 | 14 | 16 | 17 | 18 | 21 | 22 | 23 | 26 | 33 | |
200 | 10 | 12 | 13 | 14 | 16 | 17 | 18 | 20 | 21 | 23 | 24 | 26 | 27 | 30 | 32 | 34 | 38 | 41 | 44 | 49 | 61 | |
300 | 14 | 16 | 18 | 20 | 22 | 24 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 42 | 46 | 48 | 54 | 58 | 61 | 69 | 87 | |
400 | 18 | 21 | 23 | 25 | 28 | 30 | 33 | 36 | 38 | 41 | 43 | 46 | 48 | 54 | 58 | 61 | 69 | 73 | 78 | 88 | 110 | |
500 | 22 | 25 | 27 | 30 | 33 | 36 | 39 | 43 | 45 | 49 | 51 | 55 | 57 | 64 | 69 | 73 | 82 | 87 | 93 | 105 | 131 | |
600 | 25 | 28 | 32 | 35 | 38 | 42 | 46 | 49 | 52 | 56 | 59 | 63 | 66 | 74 | 80 | 84 | 95 | 100 | 107 | 121 | 151 | |
700 | 29 | 32 | 36 | 39 | 43 | 47 | 51 | 56 | 59 | 63 | 67 | 71 | 74 | 84 | 90 | 95 | 107 | 113 | 121 | 136 | 170 | |
800 | 32 | 36 | 40 | 44 | 48 | 52 | 57 | 62 | 65 | 70 | 74 | 79 | 82 | 93 | 100 | 105 | 118 | 125 | 134 | 151 | 187 | |
870 | 34 | 38 | 42 | 47 | 51 | 56 | 61 | 66 | 69 | 75 | 79 | 84 | 88 | 99 | 106 | 112 | 126 | 133 | 142 | 160 | 199 | |
1000 | 38 | 42 | 47 | 52 | 57 | 62 | 68 | 73 | 77 | 83 | 87 | 94 | 98 | 110 | 118 | 124 | 140 | 148 | 158 | 178 | 220 | |
1160 | 42 | 47 | 53 | 58 | 64 | 70 | 76 | 82 | 86 | 93 | 98 | 105 | 109 | 123 | 132 | 138 | 156 | 165 | 176 | 198 | 245 | |
1200 | 43 | 49 | 54 | 60 | 65 | 71 | 78 | 84 | 89 | 96 | 100 | 107 | 112 | 126 | 135 | 142 | 160 | 169 | 181 | 203 | 250 | |
1400 | 49 | 55 | 61 | 67 | 74 | 80 | 87 | 94 | 100 | 108 | 113 | 121 | 126 | 141 | 152 | 159 | 179 | 189 | 202 | 226 | 278 | |
1600 | 54 | 61 | 67 | 74 | 82 | 89 | 97 | 105 | 110 | 119 | 125 | 133 | 139 | 156 | 167 | 176 | 198 | 208 | 222 | 248 | 302 | |
1750 | 58 | 65 | 72 | 80 | 87 | 95 | 104 | 112 | 118 | 127 | 133 | 143 | 149 | 167 | 179 | 187 | 211 | 222 | 236 | 263 | 319 | |
2000 | 64 | 72 | 80 | 88 | 97 | 106 | 115 | 124 | 131 | 141 | 148 | 158 | 164 | 184 | 197 | 206 | 231 | 243 | 258 | 287 | 343 | |
2400 | 74 | 83 | 92 | 102 | 111 | 122 | 132 | 142 | 150 | 162 | 169 | 180 | 188 | 210 | 224 | 234 | 261 | 274 | 289 | 318 | 371 | |
2800 | 84 | 94 | 104 | 115 | 126 | 137 | 148 | 160 | 169 | 181 | 189 | 202 | 210 | 233 | 248 | 259 | 287 | 300 | 315 | 343 | 386 | |
3200 | 93 | 104 | 115 | 127 | 139 | 151 | 164 | 177 | 186 | 200 | 209 | 222 | 230 | 255 | 270 | 281 | 309 | 321 | 335 | 359 | 385 | |
3500 | 100 | 112 | 124 | 136 | 149 | 162 | 175 | 189 | 199 | 213 | 222 | 236 | 244 | 269 | 285 | 296 | 322 | 333 | 346 | 365 | 372 | |
4000 | 111 | 124 | 137 | 151 | 165 | 179 | 194 | 208 | 219 | 233 | 243 | 257 | 266 | 290 | 305 | 315 | 338 | 346 | 355 | 362 | 328 | |
4500 | 121 | 136 | 150 | 165 | 180 | 195 | 210 | 226 | 237 | 252 | 261 | 275 | 284 | 307 | 320 | 328 | 345 | 349 | 351 | 342 | 249 | |
5000 | 132 | 147 | 162 | 178 | 194 | 210 | 226 | 242 | 253 | 268 | 277 | 290 | 298 | 319 | 329 | 335 | 342 | 340 | 333 | 301 | ||
6000 | 151 | 167 | 184 | 201 | 218 | 235 | 252 | 269 | 279 | 292 | 300 | 310 | 316 | 326 | 327 | 324 | 303 | 283 | 250 | |||
7000 | 168 | 185 | 203 | 221 | 238 | 255 | 272 | 288 | 296 | 306 | 310 | 314 | 315 | 307 | 293 | 277 | 212 | |||||
8000 | 182 | 201 | 218 | 235 | 252 | 268 | 283 | 298 | 302 | 305 | 305 | 299 | 293 | 259 | 223 | 188 | ||||||
10000 | 203 | 220 | 235 | 249 | 261 | 271 | 279 | 284 | 276 | 257 | 239 | 204 | 175 | |||||||||
12000 | 211 | 223 | 231 | 237 | 238 | 236 | 229 | 218 | 189 | |||||||||||||
Shorter service intervals due to increased bending! | ||||||||||||||||||||||
ATTENTION! Below the stairway line no use of windscreen material GG (Belt speed > 33 m/s) |
Specific basic performance (kW) for belt type " Warning: Undefined array key "or" in /var/www/vhosts/krebs-kessel.de/httpdocs/inc/functions.inc.php on line 450 " O |
||||||||||||||||||||||
Drive unit speed |
Drive unit teeth no./Effective diameter in (mm) | |||||||||||||||||||||
24 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 43 | 45 | 48 | 50 | 56 | 60 | 63 | 71 | 75 | 80 | 90 | 112 | ||
Effective diameter |
106.95 | 115.86 | 124.78 | 133.69 | 142.60 | 151.52 | 160.43 | 169.34 | 178.25 | 191.62 | 200.54 | 213.90 | 222.82 | 249.55 | 267.38 | 280.75 | 316.40 | 334.23 | 356.51 | 401.07 | 499.11 | |
10 | 0.8 | 0.9 | 1.0 | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 1.8 | 1.8 | 2.0 | 2.1 | 2.3 | 2.5 | 2.6 | 3.0 | 3.1 | 3.4 | 3.8 | 4.7 | |
20 | 1.6 | 1.8 | 2.0 | 2.2 | 2.4 | 2.6 | 2.8 | 3.0 | 3.2 | 3.5 | 3.6 | 3.9 | 4.1 | 4.6 | 4.9 | 5.2 | 5.9 | 6.2 | 6.6 | 8 | 9 | |
40 | 3.1 | 3.5 | 3.8 | 4.2 | 4.7 | 5.1 | 5.5 | 6.0 | 6.3 | 6.8 | 7.2 | 8 | 8 | 9 | 10 | 10 | 12 | 12 | 13 | 15 | 18 | |
60 | 4.5 | 5.1 | 5.7 | 6.3 | 6.9 | 8 | 8 | 9 | 9 | 10 | 11 | 11 | 12 | 13 | 14 | 15 | 17 | 18 | 19 | 22 | 27 | |
100 | 7.3 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 21 | 23 | 24 | 28 | 29 | 31 | 35 | 44 | |
200 | 14 | 15 | 17 | 19 | 21 | 23 | 25 | 27 | 28 | 30 | 32 | 34 | 36 | 40 | 43 | 45 | 51 | 54 | 58 | 66 | 82 | |
300 | 19 | 22 | 24 | 27 | 29 | 32 | 35 | 38 | 40 | 43 | 45 | 48 | 50 | 57 | 61 | 64 | 72 | 77 | 82 | 93 | 116 | |
400 | 24 | 27 | 31 | 34 | 37 | 41 | 44 | 48 | 50 | 54 | 57 | 61 | 64 | 72 | 77 | 81 | 92 | 97 | 104 | 117 | 146 | |
500 | 29 | 33 | 37 | 40 | 44 | 48 | 53 | 57 | 60 | 65 | 68 | 73 | 76 | 86 | 92 | 97 | 110 | 116 | 124 | 140 | 175 | |
600 | 34 | 38 | 42 | 47 | 51 | 56 | 61 | 66 | 69 | 75 | 79 | 84 | 88 | 99 | 106 | 112 | 127 | 134 | 143 | 161 | 201 | |
700 | 38 | 43 | 48 | 53 | 58 | 63 | 69 | 74 | 78 | 85 | 89 | 95 | 99 | 112 | 120 | 126 | 143 | 151 | 161 | 182 | 226 | |
800 | 42 | 47 | 53 | 58 | 64 | 70 | 76 | 82 | 87 | 94 | 98 | 105 | 110 | 124 | 133 | 140 | 158 | 167 | 178 | 201 | 250 | |
870 | 45 | 51 | 56 | 62 | 68 | 75 | 81 | 88 | 93 | 100 | 105 | 112 | 117 | 132 | 141 | 149 | 168 | 178 | 190 | 214 | 266 | |
1000 | 50 | 56 | 63 | 69 | 76 | 83 | 90 | 97 | 103 | 111 | 117 | 125 | 130 | 146 | 157 | 165 | 187 | 197 | 211 | 237 | 294 | |
1160 | 56 | 63 | 70 | 77 | 85 | 93 | 101 | 109 | 115 | 124 | 130 | 140 | 146 | 164 | 176 | 185 | 208 | 220 | 235 | 264 | 326 | |
1200 | 58 | 65 | 72 | 80 | 87 | 95 | 103 | 112 | 118 | 128 | 134 | 143 | 149 | 168 | 180 | 189 | 214 | 226 | 241 | 270 | 334 | |
1400 | 65 | 73 | 81 | 89 | 98 | 107 | 116 | 126 | 133 | 143 | 150 | 161 | 168 | 188 | 202 | 212 | 239 | 253 | 269 | 302 | 370 | |
1600 | 72 | 81 | 90 | 99 | 109 | 119 | 129 | 139 | 147 | 159 | 166 | 178 | 185 | 208 | 223 | 234 | 263 | 278 | 296 | 331 | 403 | |
1750 | 77 | 87 | 96 | 106 | 117 | 127 | 138 | 149 | 157 | 170 | 178 | 190 | 198 | 222 | 238 | 250 | 281 | 296 | 315 | 351 | 425 | |
2000 | 86 | 96 | 107 | 118 | 129 | 141 | 153 | 165 | 174 | 188 | 197 | 210 | 219 | 245 | 262 | 275 | 308 | 324 | 344 | 382 | 457 | |
2400 | 99 | 111 | 123 | 136 | 149 | 162 | 176 | 190 | 200 | 215 | 226 | 240 | 250 | 279 | 298 | 312 | 348 | 365 | 386 | 424 | 495 | |
2800 | 111 | 125 | 139 | 153 | 167 | 182 | 198 | 214 | 225 | 242 | 253 | 269 | 280 | 311 | 331 | 346 | 383 | 400 | 420 | 457 | 514 | |
3200 | 124 | 139 | 154 | 169 | 186 | 202 | 219 | 236 | 248 | 266 | 278 | 295 | 307 | 340 | 360 | 375 | 411 | 428 | 447 | 478 | 513 | |
3500 | 133 | 149 | 165 | 182 | 199 | 216 | 234 | 252 | 265 | 284 | 296 | 314 | 326 | 359 | 380 | 394 | 429 | 444 | 461 | 486 | 497 | |
4000 | 148 | 165 | 183 | 201 | 220 | 239 | 258 | 278 | 291 | 311 | 324 | 342 | 354 | 387 | 407 | 420 | 450 | 462 | 473 | 483 | 437 | |
4500 | 162 | 181 | 200 | 220 | 239 | 260 | 280 | 301 | 315 | 336 | 348 | 367 | 378 | 409 | 427 | 438 | 459 | 465 | 468 | 455 | 332 | |
5000 | 176 | 196 | 216 | 237 | 258 | 279 | 301 | 323 | 337 | 357 | 370 | 387 | 398 | 425 | 438 | 446 | 456 | 454 | 444 | 402 | ||
6000 | 201 | 223 | 246 | 268 | 291 | 313 | 336 | 359 | 372 | 390 | 400 | 414 | 421 | 434 | 435 | 432 | 403 | 378 | 334 | |||
7000 | 224 | 247 | 271 | 294 | 317 | 340 | 362 | 384 | 395 | 407 | 413 | 419 | 420 | 410 | 391 | 370 | 282 | |||||
8000 | 243 | 267 | 291 | 314 | 336 | 358 | 378 | 397 | 403 | 407 | 406 | 399 | 391 | 346 | 298 | 251 | ||||||
10000 | 271 | 293 | 314 | 332 | 348 | 361 | 372 | 379 | 368 | 342 | 319 | 272 | 233 | |||||||||
12000 | 281 | 297 | 308 | 315 | 318 | 314 | 306 | 291 | 252 | |||||||||||||
Shorter service intervals due to increased bending! | ||||||||||||||||||||||
ATTENTION! Below the stairway line no use of windscreen material GG (Belt speed > 33 m/s) |
Specific basic performance (kW) for belt type "Red" R | ||||||||||||||||||||||
Drive unit speed |
Drive unit teeth no./Effective diameter in (mm) | |||||||||||||||||||||
24 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 43 | 45 | 48 | 50 | 56 | 60 | 63 | 71 | 75 | 80 | 90 | 112 | ||
Effective diameter |
106.95 | 115.86 | 124.78 | 133.69 | 142.60 | 151.52 | 160.43 | 169.34 | 178.25 | 191.62 | 200.54 | 213.90 | 222.82 | 249.55 | 267.38 | 280.75 | 316.40 | 334.23 | 356.51 | 401.07 | 499.11 | |
10 | 1.2 | 1.3 | 1.5 | 1.6 | 1.8 | 2.0 | 2.1 | 2.3 | 2.4 | 2.6 | 2.8 | 3.0 | 3.1 | 3.5 | 3.7 | 3.9 | 4.4 | 4.7 | 5.0 | 5.7 | 7.1 | |
20 | 2.3 | 2.6 | 2.9 | 3.2 | 3.6 | 3.9 | 4.2 | 4.6 | 4.8 | 5.2 | 5.5 | 5.9 | 6.1 | 6.9 | 7.4 | 8 | 9 | 9 | 10 | 11 | 14 | |
40 | 4.6 | 5.2 | 5.8 | 6.4 | 7.0 | 8 | 8 | 9 | 9 | 10 | 11 | 12 | 12 | 14 | 15 | 15 | 17 | 18 | 20 | 22 | 28 | |
60 | 6.8 | 8 | 9 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 20 | 21 | 23 | 26 | 27 | 29 | 33 | 41 | |
100 | 11 | 12 | 14 | 15 | 17 | 18 | 20 | 21 | 23 | 24 | 26 | 27 | 29 | 32 | 35 | 36 | 41 | 44 | 47 | 53 | 66 | |
200 | 21 | 23 | 26 | 28 | 31 | 34 | 37 | 40 | 42 | 46 | 48 | 51 | 53 | 60 | 65 | 68 | 77 | 81 | 87 | 98 | 123 | |
300 | 29 | 33 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64 | 67 | 72 | 75 | 85 | 91 | 96 | 109 | 115 | 123 | 139 | 174 | |
400 | 37 | 41 | 46 | 51 | 56 | 61 | 66 | 71 | 75 | 82 | 86 | 92 | 96 | 108 | 116 | 122 | 138 | 146 | 156 | 176 | 220 | |
500 | 44 | 49 | 55 | 61 | 67 | 73 | 79 | 85 | 90 | 97 | 102 | 109 | 114 | 129 | 138 | 145 | 165 | 174 | 186 | 210 | 262 | |
600 | 51 | 57 | 63 | 70 | 77 | 84 | 91 | 99 | 104 | 112 | 118 | 126 | 132 | 148 | 160 | 168 | 190 | 201 | 215 | 242 | 302 | |
700 | 57 | 64 | 71 | 79 | 87 | 95 | 103 | 111 | 117 | 127 | 133 | 142 | 149 | 167 | 180 | 189 | 214 | 226 | 242 | 272 | 339 | |
800 | 63 | 71 | 79 | 87 | 96 | 105 | 114 | 123 | 130 | 141 | 147 | 158 | 165 | 185 | 199 | 209 | 237 | 250 | 267 | 301 | 375 | |
870 | 68 | 76 | 84 | 93 | 102 | 112 | 121 | 131 | 139 | 150 | 157 | 168 | 176 | 198 | 212 | 223 | 252 | 267 | 285 | 321 | 399 | |
1000 | 75 | 84 | 94 | 104 | 114 | 124 | 135 | 146 | 154 | 167 | 175 | 187 | 195 | 220 | 236 | 248 | 280 | 296 | 316 | 355 | 441 | |
1160 | 84 | 95 | 105 | 116 | 128 | 139 | 151 | 164 | 173 | 187 | 196 | 209 | 218 | 245 | 263 | 277 | 313 | 330 | 352 | 396 | 489 | |
1200 | 87 | 97 | 108 | 119 | 131 | 143 | 155 | 168 | 177 | 191 | 201 | 215 | 224 | 252 | 270 | 284 | 321 | 339 | 361 | 406 | 501 | |
1400 | 97 | 109 | 122 | 134 | 147 | 161 | 175 | 189 | 199 | 215 | 226 | 241 | 252 | 283 | 303 | 318 | 359 | 379 | 404 | 452 | 555 | |
1600 | 108 | 121 | 135 | 149 | 163 | 178 | 193 | 209 | 221 | 238 | 249 | 267 | 278 | 312 | 334 | 351 | 395 | 417 | 444 | 496 | 604 | |
1750 | 116 | 130 | 144 | 159 | 175 | 191 | 207 | 224 | 236 | 255 | 267 | 285 | 297 | 333 | 357 | 375 | 421 | 444 | 472 | 526 | 638 | |
2000 | 128 | 144 | 160 | 177 | 194 | 211 | 229 | 248 | 261 | 282 | 295 | 315 | 328 | 368 | 393 | 412 | 462 | 486 | 516 | 573 | 686 | |
2400 | 148 | 166 | 184 | 203 | 223 | 243 | 264 | 285 | 300 | 323 | 338 | 361 | 375 | 419 | 447 | 468 | 522 | 548 | 579 | 637 | 743 | |
2800 | 167 | 187 | 208 | 229 | 251 | 274 | 297 | 320 | 337 | 362 | 379 | 403 | 419 | 466 | 496 | 518 | 574 | 600 | 631 | 685 | 772 | |
3200 | 186 | 208 | 231 | 254 | 278 | 303 | 328 | 354 | 372 | 399 | 417 | 443 | 460 | 509 | 540 | 562 | 617 | 642 | 670 | 718 | 769 | |
3500 | 199 | 223 | 247 | 272 | 298 | 324 | 351 | 378 | 398 | 426 | 444 | 471 | 489 | 538 | 569 | 591 | 644 | 667 | 692 | 730 | 745 | |
4000 | 222 | 248 | 274 | 302 | 329 | 358 | 387 | 417 | 437 | 467 | 486 | 513 | 531 | 580 | 610 | 630 | 675 | 693 | 709 | 724 | 655 | |
4500 | 243 | 271 | 300 | 329 | 359 | 390 | 421 | 452 | 473 | 503 | 523 | 550 | 567 | 614 | 640 | 657 | 689 | 698 | 702 | 683 | 498 | |
5000 | 263 | 293 | 324 | 355 | 387 | 419 | 451 | 484 | 506 | 536 | 554 | 581 | 597 | 637 | 658 | 669 | 683 | 681 | 667 | 603 | ||
6000 | 301 | 335 | 368 | 402 | 436 | 470 | 504 | 538 | 558 | 585 | 601 | 621 | 631 | 651 | 653 | 648 | 605 | 566 | 500 | |||
7000 | 336 | 371 | 406 | 441 | 476 | 510 | 543 | 576 | 592 | 611 | 620 | 628 | 630 | 614 | 586 | 554 | 423 | |||||
8000 | 365 | 401 | 436 | 471 | 504 | 536 | 567 | 595 | 604 | 610 | 609 | 599 | 586 | 519 | 446 | 377 | ||||||
10000 | 407 | 440 | 470 | 498 | 522 | 542 | 557 | 568 | 552 | 514 | 478 | 408 | 350 | |||||||||
12000 | 422 | 445 | 462 | 473 | 476 | 472 | 458 | 436 | 377 | |||||||||||||
Shorter service intervals due to increased bending! | ||||||||||||||||||||||
ATTENTION! Below the stairway line no use of windscreen material GG (Belt speed > 33 m/s) |
Total operating factor c0 = c2 + c3 | |||||||||
Load factor c2 | Examples of drive units | ||||||||
Electric motors with low starting torque (up to 1.5 x nominal torque) e.g. DC shunt motors, combustion- engines with 8 or more cylinders, water and steam turbines |
Three-phase and AC motors with normal starting torque (1.5-2.5 x nominal torque) e.g. DC shunt motors with compound winding, squirrel cage motors, combustion engines with 4-6 cylinders |
Three-phase and AC motors with high starting and brake torque (exceeding 2.5 x nominal torque) e.g. single phase and synchronous motors with high torque, combustion engines up to 4 cylinders |
|||||||
Examples of working machines |
Load factor c2 for daily operating time (hours) | ||||||||
up to 10 |
10 up to 16 |
over 16 |
up to 10 | 10 up to 16 |
over 16 |
up to 10 |
10 up to 16 |
over 16 |
|
Belt conveyors, measuring instruments medical equipment |
1.1 | 1.3 | 1.5 | 1.2 | 1.4 | 1.6 | 1.3 | 1.5 | 1.7 |
Tooling machinery (lightweight turning machines) woodworking machines (circular saws, belt saws, planing machines), textile machines (bobbin winding machines, wrapping machines), paper industry machinery (calenders, dryers, drum strainers), dough mixers, laundry machines |
1.2 | 1.4 | 1.6 | 1.4 | 1.6 | 1.8 | 1.6 | 1.8 | 2.0 |
Fans up to 10 kW, textile machinery (spinning, weaving and twisting), tooling machines (rolling machines, grinding machines and planing machines, lightweight milling machines), stirrers and mixers for semi-liquid products |
1.3 | 1.5 | 1.7 | 1.5 | 1.7 | 1.9 | 1.7 | 1.9 | 2.1 |
Fans (radial blowers), compressors (radial compressors), paper machines, rotary pumps, gear pumps and centrifugal pumps, Jordan pumps, belt conveyor systems for ores and coal, pit fans, heavy textile machinery, elevators, generators, rubber processing machines (calenders, extruders, mills), lifting gear, generators, exciter machines |
1.4 | 1.6 | 1.8 | 1.6 | 1.8 | 2.0 | 1.8 | 2.0 | 2.2 |
Piston machines, pumps, compressors, rolling crushers, shredders, kneading machines, fans, paper mills, defibrators |
1.6 | 1.8 | 2.0 | 1.8 | 2.0 | 2.2 | 2.0 | 2.2 | 2.4 |
Acceleration factor c3 | ||
Transmission ratio | Acceleration factor | |
i | c3 | |
1 up to 1,24 | 0,00 | |
1,25 up to 1,74 | 0,10 | |
1,75 up to 2,49 | 0,20 | |
2,50 up to 3,49 | 0,30 | |
over 3,5 | 0,40 |
Correction factor 'Yellow','White','Pink' | |||||||||||||
Belt length (mm) |
640 | 720 | 800 | 896 | 1000 | 1120 | 1200 | 1280 | 1440 | 1600 | 1792 | 2000 | |
Correction- factor |
0.79 | 0.83 | 0.87 | 0.91 | 0.96 | 1.00 | 1.03 | 1.05 | 1.10 | 1.14 | 1.18 | 1.22 | |
Belt length (mm) |
2240 | 2400 | 2520 | 2600 | 2800 | 2840 | 3048 | 3200 | 3600 | 4000 | 4400 | 4480 | |
Correction- factor |
1.26 | 1.29 | 1.31 | 1.32 | 1.35 | 1.36 | 1.38 | 1.40 | 1.45 | 1.49 | 1.52 | 1.53 | |
Correction factor 'Blue','Green','Orange','Red' | |||||||||||||
Belt length (mm) |
994 | 1120 | 1190 | 1260 | 1400 | 1568 | 1610 | 1750 | 1960 | 2100 | 2240 | 2310 | 2380 |
Correction- factor |
0.68 | 0.73 | 0.75 | 0.77 | 0.81 | 0.85 | 0.86 | 0.89 | 0.94 | 0.96 | 0.99 | 1.00 | 1.01 |
Belt length (mm) |
2450 | 2520 | 2590 | 2660 | 2800 | 3136 | 3304 | 3360 | 3500 | 3850 | 3920 | 1326 | 4410 |
Correction- factor |
1.02 | 1.03 | 1.04 | 1.05 | 1.07 | 1.12 | 1.14 | 1.14 | 1.16 | 1.19 | 1.20 | 1.24 | 1.25 |
U/min small pulley |
Y-YELLOW | W-WHITE | P-PINK | |||||||||||||||||||||
New belt | Used belt | New belt | Used belt | New belt | Used belt | |||||||||||||||||||
Small pulley teeth no. | ||||||||||||||||||||||||
18 up to 23 |
24 up to 31 |
32 up to gr. |
18 up to 23 |
24 up to 31 |
32 up to gr. |
18 up to 23 |
24 up to 31 |
32 up to gr. |
18 up to 23 |
24 up to 31 |
32 up to gr. |
18 up to 23 |
24 up to 31 |
32 up to gr. |
18 up to 23 |
24 up to 31 |
32 up to gr. |
|||||||
below 100 |
59 | 69 | 78 | 49 | 49 | 59 | 118 | 147 | 147 | 88 | 108 | 108 | 235 | 294 | 294 | 177 | 216 | 216 | ||||||
101 - 300 |
49 | 59 | 69 | 39 | 49 | 49 | 108 | 128 | 147 | 78 | 98 | 108 | 216 | 255 | 294 | 157 | 196 | 216 | ||||||
301 - 600 |
49 | 59 | 59 | 39 | 49 | 49 | 98 | 118 | 128 | 69 | 88 | 98 | 196 | 235 | 255 | 137 | 177 | 196 | ||||||
601 - 900 |
49 | 49 | 59 | 29 | 39 | 49 | 88 | 108 | 118 | 69 | 78 | 88 | 177 | 216 | 235 | 137 | 157 | 177 | ||||||
901 - 1200 |
39 | 49 | 49 | 29 | 39 | 39 | 78 | 98 | 108 | 59 | 69 | 78 | 157 | 196 | 216 | 118 | 137 | 157 | ||||||
1201 - 2000 |
39 | 49 | 49 | 29 | 29 | 39 | 78 | 88 | 98 | 59 | 69 | 69 | 157 | 177 | 196 | 118 | 137 | 137 | ||||||
2001 - 3500 |
39 | 39 | 49 | 29 | 29 | 39 | 69 | 78 | 98 | 49 | 59 | 69 | 137 | 157 | 196 | 98 | 118 | 137 | ||||||
3501 and more |
39 | 39 | 49 | 29 | 29 | 39 | 69 | 78 | 88 | 49 | 59 | 69 | 137 | 157 | 177 | 98 | 118 | 137 | ||||||
U/min small pulley |
B-BLUE | G-GREEN | O-ORANGE | R-RED | ||||||||||||||||||||
New belt | Used belt | New belt | Used belt | New belt | Used belt | New belt | Used belt | |||||||||||||||||
Small pulley teeth no. | ||||||||||||||||||||||||
18 up to 23 |
24 up to 31 |
32 up to gr. |
18 up to 23 |
24 up to 31 |
32 up to gr. |
18 up to 23 |
24 up to 31 |
32 up to gr. |
18 up to 23 |
24 up to 31 |
32 up to gr. |
18 up to 23 |
24 up to 31 |
32 up to gr. |
18 up to 23 |
24 up to 31 |
32 up to gr. |
18 up to 23 |
24 up to 31 |
32 up to gr. |
18 up to 23 |
24 up to 31 |
32 up to gr. |
|
below 100 |
235 | 255 | 275 | 177 | 196 | 196 | 363 | 383 | 412 | 265 | 284 | 294 | 481 | 520 | 540 | 353 | 383 | 402 | 716 | 775 | 814 | 530 | 579 | 608 |
101 - 300 |
226 | 235 | 245 | 167 | 177 | 186 | 334 | 363 | 373 | 245 | 265 | 275 | 441 | 481 | 500 | 334 | 353 | 373 | 667 | 716 | 746 | 491 | 530 | 549 |
301 - 600 |
196 | 216 | 226 | 147 | 157 | 167 | 304 | 334 | 343 | 226 | 235 | 255 | 402 | 432 | 451 | 294 | 324 | 334 | 598 | 657 | 677 | 441 | 481 | 500 |
601 - 900 |
186 | 196 | 206 | 137 | 147 | 157 | 284 | 304 | 314 | 206 | 226 | 235 | 373 | 402 | 422 | 275 | 294 | 314 | 559 | 598 | 628 | 412 | 441 | 461 |
901 - 1200 |
177 | 186 | 196 | 128 | 137 | 147 | 265 | 284 | 304 | 196 | 206 | 226 | 343 | 373 | 402 | 255 | 275 | 294 | 520 | 559 | 598 | 386 | 412 | 441 |
1201 - 2000 |
167 | 177 | 196 | 118 | 137 | 147 | 245 | 265 | 294 | 186 | 196 | 216 | 334 | 353 | 392 | 245 | 265 | 284 | 491 | 530 | 589 | 363 | 392 | 432 |
2001 - 3500 |
157 | 167 | 177 | 118 | 128 | 137 | 235 | 255 | 265 | 177 | 186 | 196 | 324 | 334 | 353 | 235 | 245 | 265 | 481 | 510 | 530 | 353 | 373 | 392 |
3501 and more |
147 | 157 | 167 | 108 | 118 | 118 | 216 | 235 | 245 | 157 | 177 | 186 | 284 | 314 | 334 | 206 | 235 | 245 | 432 | 471 | 491 | 314 | 343 | 363 |
m/sec | Y (Yellow) |
W (White) |
B (Blue) |
G (Green) |
O (Orange) |
R (Red) |
0 | 34.1 | 40.3 | 41.4 | 42.0 | 45.2 | 50.0 |
5 | 43.8 | 50.3 | 51.0 | 52.8 | 55.5 | 60.7 |
10 | 53.0 | 59.3 | 59.6 | 61.4 | 64.5 | 69.7 |
15 | 59.6 | 67.2 | 67.7 | 69.5 | 72.4 | 77.6 |
20 | 65.9 | 73.4 | 74.5 | 76.2 | 79.3 | 84.5 |
25 | 72.0 | 78.9 | 80.7 | 82.8 | 85.5 | 91.0 |
30 | 76.6 | 83.8 | 85.5 | 87.6 | 90.7 | 95.8 |
35 | 79.6 | 86.9 | 89.3 | 91.4 | 94.8 | 99.7 |
40 | 82.2 | 89.4 | 92.5 | 94.6 | 97.7 | 102.8 |
45 | 83.4 | 90.7 | 94.4 | 96.6 | 99.7 | 104.8 |
50 | 84.3 | 91.7 | 95.8 | 97.6 | 100.7 | 105.5 |
55 | 84.3 | 91.7 | 95.8 | 97.6 | 100.7 | 105.5 |
60 | 84.3 | 91.7 | 95.8 | 97.6 | 100.7 | 105.5 |
All values in db(A) |